NEMIX RAM
NEMIX RAM 2TB (16x128GB) DDR5 4800 CL40 4Rx4 ECC RDIMM Dell PowerEdge XE9680 memory upgrade
2 TB registered ECC server memory kit with sixteen 128 GB DDR5 4800 CL40 modules for Dell PowerEdge XE9680
- Capacity2TB (16 x 128GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 2 TB total capacity for memory-intensive workloads
- 16 modules of 128 GB each for maximum density
- DDR5 4800 speed with CL40 latency
- ECC registered design protects data integrity
- Dell PowerEdge XE9680 validated compatibility
Server memory kit
This 2 TB kit contains sixteen 128 GB DDR5 modules built for the Dell PowerEdge XE9680. Each module runs at 4800 MT/s with CL40 latency and operates at 1.1 V. The registered ECC design targets enterprise workloads that require data integrity.
Sustained workload behaviour
Registered buffering and on-die ECC keep signal quality stable during long compute runs across all sixteen slots. The 4Rx4 organisation spreads address load evenly so bandwidth remains consistent under heavy memory pressure. Modules are stress tested under load before shipment to confirm reliability.
Thermals and power
Bare modules without heat spreaders rely on the server’s directed airflow for cooling. At 1.1 V the kit draws minimal power per DIMM while delivering 38 400 MB/s peak throughput per module. No active cooling components are included in the package.
Kohokohdat
- 2 TB total capacity for memory-intensive workloads
- 16 modules of 128 GB each for maximum density
- DDR5 4800 speed with CL40 latency
- ECC registered design protects data integrity
- Dell PowerEdge XE9680 validated compatibility
Tekniset tiedot
| Brand | NEMIX RAM |
|---|---|
| Series | Dell Server/Workstation Compatible Series Memory |
| Model | Dell DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-744K16 |
| Capacity | 2TB (16 x 128GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Dell |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 4Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 2TB (16X128GB) DDR5 4800MHZ PC5-38400 4Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory |
Kysymyksiä tästä tuotteesta
How much power do the 1.1 V DDR5 4800 modules draw when the server runs continuously?
Each module operates at 1.1 V, the standard DDR5 voltage, so total power scales with the 16 modules installed and the workload on the Dell PowerEdge XE9680.
What must the Dell PowerEdge XE9680 already have to accept these 288-pin RDIMMs?
The server needs DDR5 RDIMM slots that support 4Rx4 registered ECC modules and a BIOS revision that recognises 128 GB per DIMM at 4800 MT/s.
Will the CL40 4Rx4 sticks work alongside older DDR5 4800 modules already in the XE9680?
Yes, if the existing modules are also DDR5 4800 ECC RDIMMs; the system will run all channels at the common 4800 speed and CL40 latency.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.



