Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 32GB (2×16GB) DDR5 4800 CL40 ECC RDIMM SuperMicro Server memory upgrade

SKU CH-ZA69-TQJ5F

DDR5 4800 ECC registered DIMM kit adds 32 GB to compatible SuperMicro servers

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • ECC registered design protects data integrity in mission-critical workloads
  • DDR5 4800 speed delivers high bandwidth for demanding server applications
  • 32GB dual-rank kit expands memory capacity for virtualisation and databases
  • 1V operation reduces power draw in dense SuperMicro deployments
  • 288-pin RDIMM form factor ensures direct compatibility with listed SuperMicro Hyper SuperServer systems

SuperMicro DDR5 4800 ECC RDIMM Kit

This 32 GB kit contains two 16 GB DDR5 4800 registered DIMMs with ECC and a CL40 latency. It targets administrators upgrading SuperMicro Hyper SuperServer models SYS-121H-TNR, SYS-221H-TNR and SYS-221H-TN24R where registered error-correcting memory is required.

Installation notes for registered DIMMs

Modules are 288-pin DDR5 RDIMMs that seat in standard server DIMM slots; no heat spreader is fitted, so clearance is minimal. The usual issue is mixing registered and unbuffered DIMMs or populating slots in an order the motherboard manual forbids, which prevents the system from posting.

Pre-order checklist for SuperMicro servers

Verify that each target server lists DDR5 4800 RDIMM support and that the BIOS revision recognises 1Rx8 registered modules at 1.10 V. Confirm the maximum module capacity per slot and the total number of populated channels the board allows before adding this kit.

Kohokohdat

  • ECC registered design protects data integrity in mission-critical workloads
  • DDR5 4800 speed delivers high bandwidth for demanding server applications
  • 32GB dual-rank kit expands memory capacity for virtualisation and databases
  • 1V operation reduces power draw in dense SuperMicro deployments
  • 288-pin RDIMM form factor ensures direct compatibility with listed SuperMicro Hyper SuperServer systems

Tekniset tiedot

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (2X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Kysymyksiä tästä tuotteesta

How can I verify the kit is running at DDR5 4800 CL40 after installation?

Check the BIOS memory information screen or a system utility such as CPU-Z; both should report 4800 MT/s speed and CAS latency 40 for each 16 GB module.

What comes in the box and is anything else required for a SuperMicro Hyper SuperServer SYS-121H-TNR or SYS-221H-TNR?

The kit includes two 16 GB DDR5 4800 ECC RDIMM modules; no extra parts are needed for the listed SuperMicro systems.

Which capacity kit should I choose if my SuperMicro server has 24 DIMM slots and I want to populate half of them?

A 32 GB kit (2 × 16 GB) fills two slots; twelve such kits would occupy 24 slots for a total of 384 GB.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.