Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR5 ECC RDIMM sticks, 16GB each, no heat spreader

NEMIX RAM

NEMIX RAM 32GB (2×16GB) DDR5 4800 ECC RDIMM Dell Precision 5860

SKU CH-0B8V-B5DJ8

32 GB dual-rank DDR5 4800 ECC registered RDIMM kit with CL40 latency and 1.1 V operation for Dell Precision 5860 workstations

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • ECC protection guards data integrity with registered DDR5 modules
  • 4800 MT/s speed delivers high bandwidth for workstation workloads
  • 32 GB kit (2 × 16 GB) expands capacity in matched pairs
  • 10 V operation reduces power draw under load
  • Validated for Dell Precision 5860 tower workstations

32 GB DDR5 ECC RDIMM Kit

This NEMIX RAM kit delivers 32 GB of DDR5 4800 registered ECC memory in two 16 GB modules. It is built for the Dell Precision 5860 tower workstation and operates at 1.1 V with CL40 latency. The 288-pin RDIMM format ensures signal integrity for professional workloads.

Suited for Precision 5860 upgrades

The kit suits IT professionals expanding memory in a Dell Precision 5860 for ECC-dependent tasks such as scientific computing or virtualization. It is not for consumer desktops or laptops that require unbuffered non-ECC DDR5. Buyers needing higher capacity per module or faster speeds should look elsewhere.

Simple DIMM installation

Installation follows the workstation manual: power down, open the chassis, align the 288-pin modules with the DDR5 slots, and press until the latches click. No heat spreader is present, so airflow over the bare PCB is required. Common issues include mixing registered and unbuffered DIMMs or populating slots in the wrong order.

Kohokohdat

  • ECC protection guards data integrity with registered DDR5 modules
  • 4800 MT/s speed delivers high bandwidth for workstation workloads
  • 32 GB kit (2 × 16 GB) expands capacity in matched pairs
  • 10 V operation reduces power draw under load
  • Validated for Dell Precision 5860 tower workstations

Tekniset tiedot

BrandNEMIX RAM
SeriesDell Series Server Memory
ModelDell Compatible DDR5 ECC Registered RDIMM
Part NumberMR38400-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 ECC Registered Server Motherboard Compatible

Kysymyksiä tästä tuotteesta

Do I need a motherboard with 288-pin DDR5 RDIMM slots to use this memory kit?

Yes, this kit uses 288-pin DDR5 RDIMM modules that require a compatible motherboard with registered DIMM slots supporting DDR5 4800 (PC5-38400) at 1.10V.

Will these CL40 1Rx8 modules work if I keep my existing DDR5 4800 ECC RDIMMs in the other channels?

Mixing ranks or latencies can cause instability; for best results populate all channels with identical 1Rx8 CL40 modules or follow the Dell Precision 5860 memory configuration guide.

How can I verify the kit is running at DDR5 4800 with ECC active after installation?

Check the system BIOS or UEFI memory information screen — it should report 4800 MT/s, CL40, 1.10V, and ECC enabled for each installed 16 GB module.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.