Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR5 ECC UDIMM sticks in silver static bags

NEMIX RAM

NEMIX RAM 32GB (2 x 16GB) DDR5 5200MHz ECC UDIMM server RAM

SKU CH-6GXB-P728D

A 32 GB dual-channel DDR5 ECC UDIMM kit running at 5200 MHz with CL44 latency and 1.1 V operation

  • Capacity32GB (2 x 16GB)
  • SpeedDDR5 5200 (PC5 41600)
  • CAS Latency44
  • Voltage1.1V
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • 32 GB kit (2 × 16 GB) expands server memory capacity
  • DDR5 5200 MT/s PC5-41600 speed supports demanding workloads
  • ECC UDIMM detects and corrects single-bit data errors
  • 1 V operation reduces power draw per module
  • 1Rx8 single-rank layout simplifies memory controller scheduling

32GB DDR5 ECC kit for servers

This 32GB kit contains two 16GB DDR5 5200MHz modules built to the PC5-41600 standard. Each stick is a 1Rx8 unbuffered ECC UDIMM running at 1.1V with a CAS latency of 44. It targets administrators upgrading or repairing servers that require DDR5 ECC memory in the 288-pin form factor.

ECC and major OEM chips improve data integrity

On-die ECC corrects single-bit errors before they reach the CPU, reducing silent data corruption in critical workloads. The modules use memory dies sourced from major OEM suppliers — Samsung, Micron or Hynix — ensuring consistent quality across the kit. No additional software or drivers are bundled; the benefit is realised at the hardware level once the DIMMs are seated.

Straightforward UDIMM installation

The unbuffered 288-pin design fits standard DDR5 UDIMM slots without registration buffers, so installation follows the usual DIMM procedure. Common issues arise when the platform firmware does not yet support 5200MHz speeds or when mixed-rank populations prevent the kit from training at its rated frequency; verifying the motherboard qualified-vendor list beforehand avoids these problems.

Kohokohdat

  • 32 GB kit (2 × 16 GB) expands server memory capacity
  • DDR5 5200 MT/s PC5-41600 speed supports demanding workloads
  • ECC UDIMM detects and corrects single-bit data errors
  • 1 V operation reduces power draw per module
  • 1Rx8 single-rank layout simplifies memory controller scheduling

Tekniset tiedot

BrandNEMIX RAM
ModelPart#: ME41600-618K2-SM-AS-1015A-MT-01-G2
Part NumberPart#: ME41600-618K2-SM-AS-1015A-MT-01-G2
Capacity32GB (2 x 16GB)
SpeedDDR5 5200 (PC5 41600)
CAS Latency44
Voltage1.1V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix

Kysymyksiä tästä tuotteesta

Will the 1Rx8 ECC UDIMM modules need replacement after extended server operation?

The modules are built with major OEM Samsung, Micron or Hynix chips and carry a lifetime replacement warranty from NEMIX RAM.

What limit appears first when running the kit continuously at DDR5 5200 with CL44?

The CAS latency of 44 cycles at 5200 MT/s sets the timing boundary before bandwidth or voltage limits are reached.

How much heat and power does the 1.1 V 32 GB kit produce under all-day load?

Operating at 1.1 V, the unbuffered DDR5 modules draw minimal power and generate low heat, aided by the 1Rx8 single-rank layout.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.