Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR4 SODIMM modules, 260-pin, no heat spreader

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 2400 CL17 SODIMM Kit POSIFLEX XT-6515E JIVA

SKU CH-PFTX-VWFJK

A 32 GB DDR4 SODIMM kit with two 16 GB modules running at 2400 MHz CL17 for the POSIFLEX XT-6515E JIVA terminal

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32GB kit doubles capacity for demanding POS workloads
  • DDR4 2400 CL17 timing balances speed and stability
  • 2V low-voltage operation reduces heat in fanless terminal
  • 260-pin SODIMM form factor fits POSIFLEX XT-6515E JIVA exactly
  • Major OEM chips from Samsung, Micron, Hynix ensure reliable supply

POSIFLEX XT-6515E JIVA Compatible Kit

This 32 GB kit is built for the POSIFLEX XT-6515E JIVA high-end fanless POS terminal. It contains two 16 GB DDR4 SODIMM modules rated at 2400 MT/s with CL17 latency. The non-ECC unbuffered design matches the terminal's motherboard requirements for reliable transaction processing.

260-Pin SODIMM Form Factor

Each module uses the standard 260-pin DDR4 SODIMM layout and operates at 1.20 V. The 2Rx8 organisation and major OEM chips from Samsung, Micron or Hynix ensure stable operation inside the compact, fanless chassis. No heat spreader is fitted, keeping the profile low for tight internal clearances.

Upgrade From Lower Capacity DDR4 SODIMMs

The kit replaces smaller or slower DDR4 SODIMM pairs to maximise the terminal's two-slot limit. The jump is worthwhile when the workload demands more simultaneous applications or larger in-memory databases. It does not suit systems that require ECC, registered modules or DDR5 memory.

Kohokohdat

  • 32GB kit doubles capacity for demanding POS workloads
  • DDR4 2400 CL17 timing balances speed and stability
  • 2V low-voltage operation reduces heat in fanless terminal
  • 260-pin SODIMM form factor fits POSIFLEX XT-6515E JIVA exactly
  • Major OEM chips from Samsung, Micron, Hynix ensure reliable supply

Tekniset tiedot

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT

Kysymyksiä tästä tuotteesta

What speed does the DDR4 2400 SODIMM kit run at in a POSIFLEX XT-6515E JIVA?

The kit operates at DDR4 2400 (PC4-19200) with CL17 latency at 1.20V, matching the terminal's supported memory specification.

Will the 260-pin SODIMM modules fit the POSIFLEX XT-6515E JIVA's memory slots?

Yes, each 16GB module uses the standard 260-pin DDR4 SODIMM form factor required by the POSIFLEX XT-6515E JIVA.

How do I install the two 16GB sticks, and what step is often missed?

Power off the terminal, open the memory compartment, insert both SODIMMs at an angle until the gold contacts are hidden, then press down firmly until the side clips click — the click confirms full seating.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.