Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green SODIMM sticks with black chips side by side

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR4 2666 CL19 SODIMM POSIFLEX TX-2300

SKU CH-CSFZ-76NGP

32 GB DDR4 SODIMM kit (2 × 16 GB) at 2666 MT/s CL19, 1.2 V, for POSIFLEX TX-2300

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32GB kit doubles capacity for POSIFLEX TX-2300
  • DDR4 2666 speed matches system specification
  • CL19 latency at 1.2V standard voltage
  • 2Rx8 dual-rank organisation on major OEM chips
  • 260-pin SODIMM form factor fits mini-PC slot

POSIFLEX TX-2300 memory kit

This 32 GB kit contains two 16 GB DDR4 2666 SODIMM modules built for the POSIFLEX TX-2300 Mini-PC. Each stick runs at 1.2 V with CL19 timing and a 2Rx8 organisation. The 260-pin unbuffered non-ECC design matches the system's memory controller exactly.

Low-voltage DDR4 operation

Running at 1.20 V keeps power draw modest and heat output low inside the compact chassis. No heat spreaders are fitted, so airflow from the system fan passes directly over the DRAM packages. The JEDEC-standard voltage avoids extra stress on the memory regulator.

Two-module kit only

The package supplies a matched pair of 16 GB modules for a total of 32 GB; no extra brackets, tools or software are included. Builders who need more capacity or a different form factor must look elsewhere. Installation follows the Mini-PC's own service manual.

Kohokohdat

  • 32GB kit doubles capacity for POSIFLEX TX-2300
  • DDR4 2666 speed matches system specification
  • CL19 latency at 1.2V standard voltage
  • 2Rx8 dual-rank organisation on major OEM chips
  • 260-pin SODIMM form factor fits mini-PC slot

Tekniset tiedot

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM
Part NumberMS21300-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM KIT

Kysymyksiä tästä tuotteesta

How do I install the 260-pin SODIMM modules in the POSIFLEX TX-2300, and what step is often missed?

Power off and unplug the unit, open the memory compartment, insert each 16 GB stick at an angle until the gold contacts disappear, then press down firmly until both side clips click — the click is the step people skip.

What maintenance or replacement will this 32 GB DDR4 kit need later?

No routine maintenance is required; the modules have no heat spreader and no moving parts, so replacement is only necessary if a stick fails or the system is upgraded beyond 32 GB.

What limit appears first during sustained workloads on this CL19 2666 MT/s memory?

The CAS 19 latency at 2666 MT/s sets the bandwidth ceiling, so throughput saturates before voltage or thermal limits are reached.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.