NEMIX RAM 8GB DDR4 2666 ECC Unbuffered SODIMM
- 8GB
- 260-Pin DDR4 SO-DIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
A 32GB kit of four 8GB DDR3 1600MHz CL11 1.35V 240-pin UDIMM modules for desktop upgrades
Capacity 32GB (4 x 8GB)
This NEMIX RAM kit supplies 32 GB of desktop memory in four 8 GB UDIMM modules. It runs at DDR3 1600 with a CAS latency of 11 and operates at 1.35 V. The 240-pin unbuffered non-ECC design fits standard desktop DIMM slots.
Builders restoring or expanding a DDR3 platform can use this kit to reach 32 GB across four slots. Systems that require registered or ECC modules, or boards limited to standard voltage only, should look at a different product.
The 1.35 V operating voltage is the single specification that determines whether this memory will work in a given motherboard. Verify that the board supports low-voltage DDR3 before purchase.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory |
| Model | Original Series DDR3 Desktop PC Memory Solutions |
| Part Number | MD12800-828LK4 |
| Capacity | 32GB (4 x 8GB) |
| Type | 240-Pin DDR3 UDIMM |
| Speed | DDR3 1600 (PC3 12800) |
| CAS Latency | CL11 |
| Voltage | 1.35V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| LED Color | None |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Yes, each stick is a 240-pin DDR3 UDIMM rated at 1.35 V, so it will seat in standard DDR3 slots that accept low-voltage memory.
The modules are rated DDR3 1600 (PC3-12800) with CL11; most boards will default to a lower JEDEC speed, so you may need to enable the XMP or DOCP profile to reach 1600 MHz.
The kit has no heat spreaders and operates at 1.35 V; typical case airflow is sufficient, but ensure your chassis moves air over the memory area.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?