Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green bare circuit board with gold edge connectors and black memory chips

NEMIX RAM

NEMIX RAM 32GB DDR5 4800 CL40 1.1V 288-Pin ECC RDIMM memory upgrade

SKU CH-QXZW-SYMY3

A 32 GB DDR5 registered ECC module running at 4800 MT/s with CL40 latency and 1.1 V operation for compatible Supermicro servers

  • Capacity32GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB capacity supports heavy server workloads
  • DDR5 4800 speed delivers high data throughput
  • ECC registered design protects data integrity
  • 1 V operation reduces power consumption
  • Validated for Supermicro 421 and 821 GPU SuperServer systems

32GB DDR5 ECC RDIMM for Supermicro Servers

This registered DDR5 module delivers 32GB of error-correcting memory at 4800MHz with a CL40 latency. It is built for Supermicro GPU SuperServer platforms such as the SYS-821GE-TNHR and SYS-421GE-TNRT where data integrity is mandatory.

DDR5 4800 registered limits and platform constraints

The DDR5 4800 standard caps transfer rates at 4800MT/s and the registered buffer adds one cycle of latency versus unbuffered DIMMs. ECC operation requires a motherboard chipset and BIOS that expose the ECC syndrome registers; consumer desktop boards will not enable the feature.

Tool-free installation and common pitfalls

The 288-pin RDIMM seats in a standard DDR5 server slot with the ejector tabs locking automatically. Most failures come from mixing registered and unbuffered modules, populating slots in the wrong sequence for the specific Supermicro model, or leaving the BIOS at default speeds instead of selecting the rated 4800MHz profile.

Kohokohdat

  • 32 GB capacity supports heavy server workloads
  • DDR5 4800 speed delivers high data throughput
  • ECC registered design protects data integrity
  • 1 V operation reduces power consumption
  • Validated for Supermicro 421 and 821 GPU SuperServer systems

Tekniset tiedot

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-314K1
Capacity32GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content32GB (1X32GB) DDR5 4800MHZ PC5-38400 1Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Kysymyksiä tästä tuotteesta

Should I choose the 32GB single module or look for a multi-stick kit?

This listing is a single 32GB 1Rx4 RDIMM. If your Supermicro server has free 288-pin slots you can add one module now and match another identical stick later for dual-channel performance.

What does the 4800 MT/s rating deliver inside a Supermicro GPU SuperServer?

The module runs at DDR5 4800 (PC5-38400) with CL40 latency at 1.10V, giving the rated bandwidth when the platform memory controller is set to 4800 MT/s in the BIOS.

How does the 288-pin ECC RDIMM interface limit speed and capacity on these systems?

The registered 288-pin DDR5 interface supports the 4800 MT/s JEDEC standard; the server chipset and CPU memory controller determine the maximum populated speed and total capacity per channel.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.