Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 32GB DDR5 5600 CL46 2Rx8 UDIMM Supermicro X13SAE-F memory upgrade

SKU CH-XPY9-DAJV0

32GB DDR5 5600 CL46 2Rx8 UDIMM validated for Supermicro X13SAE-F at full rated speed

  • Capacity32GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo
  • Exact DDR5-5600 spec match ensures full-speed recognition
  • 32GB 2Rx8 Non-ECC UDIMM validated for Supermicro X13SAE-F
  • Major OEM chips from Samsung, Micron, Hynix tested at rated CL46 1.1V
  • 288-pin unbuffered form factor fits the board's required DIMM slots
  • Lifetime replacement warranty with free US-based technical support

Exact DDR5-5600 upgrade for Supermicro X13SAE-F

This 32GB non-ECC UDIMM runs at 5600MHz PC5-44800 with CL46 latency and 1.1V operation. The 2Rx8 rank structure and 288-pin layout match the board's native memory controller expectations. It is built for desktop workstations that require a single validated module rather than a matched pair.

Check your motherboard manual for population order

The Supermicro X13SAE-F defines specific slot-filling rules and maximum capacity per channel that must be followed. Verify the approved DIMM sequence and total supported memory before installing this 32GB stick. No heat spreader is fitted, so ensure case airflow reaches the module.

Single-module kit simplifies incremental expansion

The package contains one 32GB UDIMM, allowing you to add capacity without buying a dual-channel pair. Major OEM chips from Samsung, Micron or Hynix are tested at rated speed and voltage for stability. Lifetime replacement coverage and US-based technical support back the module.

Kohokohdat

  • Exact DDR5-5600 spec match ensures full-speed recognition
  • 32GB 2Rx8 Non-ECC UDIMM validated for Supermicro X13SAE-F
  • Major OEM chips from Samsung, Micron, Hynix tested at rated CL46 1.1V
  • 288-pin unbuffered form factor fits the board's required DIMM slots
  • Lifetime replacement warranty with free US-based technical support

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-328K1
Capacity32GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the kit include only the 32GB DDR5 5600 CL46 UDIMM or are extra parts required?

The package contains one 32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-pin Non-ECC UDIMM; no additional components are needed for installation.

Should I choose the 2Rx8 CL46 version or a different rank and latency for the Supermicro X13SAE-F?

This module matches the board's validated 2Rx8 organisation and CL46 timing at 1.1V, so it will be recognised at full capacity and run at the rated 5600 speed.

Will the 5600MHz rating actually run at 5600 in the X13SAE-F or does it drop to a lower speed?

The kit is spec-matched to the motherboard's DDR5 5600MHz PC5-44800 requirement, so the memory controller will operate it at the full 5600 data rate with CL46 latency.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.