Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with black memory chips in a single row, gold edge connector, no heat spreader, DDR5 UDIMM form factor

NEMIX RAM

NEMIX RAM 32GB DDR5 5600 CL46 ECC UDIMM memory upgrade

SKU CH-94DR-835DF

32GB DDR5 5600 ECC UDIMM module at 1.1V with CL46 latency for Micron-compatible servers and workstations

  • Capacity32GB
  • SpeedDDR5 5600 (PC5 44800)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32 GB capacity expands server memory headroom
  • DDR5 5600 speed delivers high data throughput
  • ECC protection detects and corrects memory errors
  • 1 V operation reduces power draw per module
  • 288-pin UDIMM form factor fits compatible Micron systems

Micron-compatible DDR5 ECC UDIMM

This 32 GB DDR5 module runs at 5600 MT/s with CL46 latency and operates at 1.10 V. It is built as a 2Rx8 unbuffered ECC UDIMM on a 288-pin PCB and targets Micron server and workstation platforms that require error-correcting memory without registered buffering.

Straightforward DIMM installation

The module seats in a standard DDR5 UDIMM slot and needs no extra cables or software. Most issues arise when the motherboard firmware lacks support for unbuffered ECC or when the memory controller cannot train at 5600 MT/s, so verify the platform qualified-vendor list before fitting.

Suits Micron workstations needing ECC

Builders expanding a compatible Micron system gain 32 GB of error-correcting capacity in a single slot. Buyers whose boards only accept registered RDIMMs, non-ECC UDIMMs or a different DDR generation should look elsewhere because this module will not function in those configurations.

Kohokohdat

  • 32 GB capacity expands server memory headroom
  • DDR5 5600 speed delivers high data throughput
  • ECC protection detects and corrects memory errors
  • 1 V operation reduces power draw per module
  • 288-pin UDIMM form factor fits compatible Micron systems

Tekniset tiedot

BrandNEMIX RAM
SeriesMicron Server/Workstaion Compatible Series Memory
ModelMicron DDR5 5600MHZ ECC Unbuffered UDIMM
Part NumberME44800-328K1
Capacity32GB
SpeedDDR5 5600 (PC5 44800)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemMICRON
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 ECC UDIMM
Rank2Rx8
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR5 5600MHZ PC5-44800 2Rx8 1.1V CL46 288-PIN ECC Unbuffered UDIMM

Kysymyksiä tästä tuotteesta

How can I confirm the module is running at 5600 MT/s with CL46 after installation?

Open the BIOS or a system-information tool such as CPU-Z and verify the reported speed shows 5600 MT/s and the CAS latency reads 46.

What does the package contain and is any extra hardware required?

The box includes one 32 GB 288-pin DDR5 ECC UDIMM; no additional cables, brackets or heat spreaders are needed.

Which capacity and rank option should I select for a Micron-compatible server?

Choose the single 32 GB 2Rx8 module (part ME44800-328K1) to match the Micron MTC20C2085S1TC56B specification.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.