NEMIX RAM
NEMIX RAM 32GB DDR5 5600 ECC RDIMM 2Rx4 CL46 1.1V SuperMicro MBD-X13DGU memory upgrade
A 32 GB DDR5 registered ECC module running at 5600 MT/s with CL46 latency and 1.1 V for SuperMicro MBD-X13DGU servers
- Capacity32GB
- SpeedDDR5 5600 (PC5 44800)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- ECC protection prevents data corruption in critical workloads
- Registered design stabilises signal integrity for dense server configurations
- DDR5 5600 speed delivers high bandwidth for AI and HPC tasks
- 1 V operation reduces power draw per module
- Validated for SuperMicro MBD-X13DGU motherboard compatibility
SuperMicro MBD-X13DGU DDR5 RDIMM upgrade
This 32GB DDR5 5600 ECC registered DIMM is validated for the SuperMicro MBD-X13DGU AI SuperServer motherboard. It targets administrators expanding memory capacity in 288-pin DDR5 server platforms that require registered error-correcting modules. The single-module kit allows precise population of available slots without purchasing unnecessary pairs.
2Rx4 organisation and 1.1V operation
The module uses a 2Rx4 configuration with CL46 latency at the DDR5 5600 data rate. Registered buffering reduces electrical load on the memory controller, while on-die ECC corrects single-bit errors to maintain data integrity under sustained AI and HPC workloads. The 1.1V nominal voltage aligns with the DDR5 standard for power-efficient server deployments.
Verify DDR5 RDIMM slot availability
Confirm the MBD-X13DGU has a free 288-pin DDR5 RDIMM slot and consult the board manual for supported ranks per channel and maximum capacity per DIMM. Systems limited to single-rank modules or lower maximum densities will not accept this 2Rx4 32GB part. Mixed-rank populations can reduce achievable speeds or prevent boot.
Kohokohdat
- ECC protection prevents data corruption in critical workloads
- Registered design stabilises signal integrity for dense server configurations
- DDR5 5600 speed delivers high bandwidth for AI and HPC tasks
- 1 V operation reduces power draw per module
- Validated for SuperMicro MBD-X13DGU motherboard compatibility
Tekniset tiedot
| Brand | NEMIX RAM |
|---|---|
| Series | SuperMicro Server/Workstation Compatible Series Memory |
| Model | Supermicro DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR44800-324K1 |
| Capacity | 32GB |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-PIN DDR5 RDIMM |
| Rank | 2Rx4 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 32GB (1X32GB) DDR5 5600MHZ PC5-44800 2Rx4 1.1V CL46 288-PIN ECC RDIMM Registered Server Memory |
Kysymyksiä tästä tuotteesta
Will the 32GB DDR5 5600 RDIMM require any firmware updates or reseating after prolonged operation in the SuperMicro MBD-X13DGU?
No firmware updates are needed for the memory itself. The module is validated for the MBD-X13DGU and installs once; reseating is only required if the system is moved or the chassis is opened.
What limit appears first when the 2Rx4 ECC RDIMM runs at 5600 MT/s continuously under heavy load?
The CAS latency of CL46 at 1.10 V is the primary timing constraint; sustained throughput is bounded by the DDR5 5600 (PC5-44800) data rate and the registered buffer.
How much heat and power does the 32GB 1.1 V DDR5 RDIMM produce when the server runs all day?
Operating at 1.1 V, the module draws minimal power and has no heat spreader; it relies on server airflow, so noise and thermal output stay at platform baseline levels.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.



