Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six green DDR5 RDIMM modules in a row, no heat spreaders

NEMIX RAM

NEMIX RAM 384GB 6x64GB DDR5 4800 CL40 1.1V 2Rx4 ECC RDIMM Supermicro H13SRH memory upgrade

SKU CH-4RHN-DREG2

A 384 GB DDR5 ECC registered memory kit of six 64 GB modules running at 4800 MHz CL40 and 1.1 V, validated for the Supermicro H13SRH motherboard

  • Capacity384GB (6 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 384GB 6X64GB

Näytä 18 muuta kokoonpanoa

Speed 4800MHz

  • 384GB capacity across six 64GB modules for maximum server density
  • DDR5-4800 speed with CL40 latency matching controller expectations
  • Registered ECC architecture corrects single-bit errors preventing silent data corruption
  • 1V operation at 2Rx4 rank configuration for full-slot stability
  • 288-pin RDIMM form factor verified for Supermicro H13SRH motherboard

Exact-match upgrade for Supermicro H13SRH

This 384GB kit delivers six 64GB DDR5 4800 modules built to the registered ECC specification the board expects. The 2Rx4 organisation, 1.10V operating voltage and CL40 timing match the controller requirements so the full capacity is recognised at rated speed. It is intended for administrators who need maximum memory density in a validated configuration.

Registered RDIMM form factor with ECC

Each module uses the 288-pin registered design that offloads the memory controller, allowing all slots to run fully populated without signal degradation. On-die ECC corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots in production workloads. No heat spreaders are fitted, so airflow in dense server chassis remains unimpeded.

Six-module kit ready for population rules

The package contains the complete 6x64GB set, eliminating the need to source individual sticks and reducing the risk of mixed-rank installations. Before installation, consult the motherboard manual for the approved DIMM population order and maximum supported capacity per channel. Lifetime replacement coverage and US-based technical support are included.

Kohokohdat

  • 384GB capacity across six 64GB modules for maximum server density
  • DDR5-4800 speed with CL40 latency matching controller expectations
  • Registered ECC architecture corrects single-bit errors preventing silent data corruption
  • 1V operation at 2Rx4 rank configuration for full-slot stability
  • 288-pin RDIMM form factor verified for Supermicro H13SRH motherboard

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-924K6
Capacity384GB (6 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 6X64GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What DDR5 speed and latency does this 384GB kit run at?

The kit operates at DDR5 4800 (PC5 38400) with CL40 CAS latency at 1.10V, the exact speed and timing the Supermicro H13SRH memory controller expects for full-capacity recognition.

What physical slot and form factor must the motherboard provide for these modules?

The motherboard needs six 288-pin DDR5 RDIMM slots; this kit uses registered 2Rx4 DIMMs, not UDIMM or SODIMM, and the H13SRH population rules must be followed.

What is the correct installation order for all six DIMMs on the H13SRH?

Consult the Supermicro H13SRH manual for the approved DIMM population sequence; installing modules in the wrong slot order is the step most often missed and can prevent the system from posting at full 384GB capacity.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.