Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 48GB DDR5 6400 PC5-51200 1Rx4 CL52 ECC Registered RDIMM server RAM

SKU CH-R3DJ-W8869

48 GB DDR5 6400 registered ECC module for servers needing 1.1 V operation and CL52 latency

  • Capacity48GB
  • SpeedDDR5 6400 (PC5 51200)
  • CAS Latency52
  • Voltage1.1V
  • ECCYes
  • Buffered/RegisteredRegistered
  • 48GB capacity for memory-intensive server workloads
  • DDR5 6400 speed enables high-throughput data processing
  • ECC registered design detects and corrects memory errors
  • 1V operation reduces power draw per module
  • 1Rx4 288-pin RDIMM fits compatible DDR5 server slots

48 GB DDR5 6400 registered ECC module

This single 48 GB DDR5 6400 RDIMM delivers registered ECC memory for server platforms that require error correction and signal buffering. It operates at 1.1 V with a CAS latency of 52 and uses a 1Rx4 organisation on a 288-pin form factor. The module is built for enterprise workloads and is not intended for desktop PCs.

Thermals power and noise in normal use

Registered DDR5 modules run at 1.1 V, which keeps power draw low compared to higher-voltage server memory. The RDIMM register reduces electrical loading on the memory bus, helping maintain stable temperatures under sustained throughput. No active cooling is required on the module itself; airflow from standard server chassis fans is sufficient.

Build integration and system impact

The 288-pin RDIMM fits DDR5 server slots that support registered ECC memory and 1Rx4 density. Each module provides 48 GB in a single slot, leaving additional DIMM positions free for further capacity expansion. Systems must support DDR5 6400 registered ECC operation; desktop consumer platforms cannot use this memory.

Kohokohdat

  • 48GB capacity for memory-intensive server workloads
  • DDR5 6400 speed enables high-throughput data processing
  • ECC registered design detects and corrects memory errors
  • 1V operation reduces power draw per module
  • 1Rx4 288-pin RDIMM fits compatible DDR5 server slots

Tekniset tiedot

BrandNEMIX RAM
ModelPart#: MR51200-4814K1-MTC20F104XS1RC64BR-V27
Part NumberPart#: MR51200-4814K1-MTC20F104XS1RC64BR-V27
Capacity48GB
SpeedDDR5 6400 (PC5 51200)
CAS Latency52
Voltage1.1V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx4
ChipsetMajor OEM Samsung, Micron, Hynix

Kysymyksiä tästä tuotteesta

How do I install the 288-PIN DDR5 ECC Registered RDIMM and what step is often missed?

Align the notch on the 288-PIN module with the DDR5 slot key, press firmly until both retention clips click, then verify the server BIOS recognises the 48GB 1Rx4 6400MHz module at 1.1V.

What maintenance or replacement will this 48GB DDR5 6400 ECC RDIMM need over its service life?

The module has no user-serviceable parts; if a correctable ECC error count rises or the server reports a persistent memory fault, replace the RDIMM under the lifetime replacement warranty.

What limit appears first when this 1.1V DDR5 6400 1Rx4 RDIMM runs sustained workloads?

The CAS latency of 52 cycles at 6400MHz sets the timing floor; under continuous load the memory controller will hit this latency boundary before thermal or voltage limits are reached.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.