Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Eight green circuit boards with gold edge connectors and black memory chips, no heat spreaders

NEMIX RAM

NEMIX RAM 512GB (8×64GB) DDR5 6400 CL52 4Rx4 ECC RDIMM memory upgrade

SKU CH-Y1MN-C41VC

Eight 64 GB DDR5 registered ECC modules at 6400 MT/s CL52 1.10 V for Supermicro X14SRA-F servers

  • Capacity512GB (8 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 512GB 8X64GB

Näytä 4 muuta kokoonpanoa
  • 512 GB total capacity from eight 64 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated throughput for demanding workloads
  • Registered ECC design with 4Rx4 organisation ensures full-slot stability and error correction
  • 1 V operation at 288-pin RDIMM form factor matches motherboard electrical requirements
  • Verified compatibility with Supermicro X14SRA-F motherboard for guaranteed fitment

System-specific server memory kit

This NEMIX RAM kit delivers 512 GB across eight 64 GB DDR5 RDIMM modules. It is built for the Supermicro X14SRA-F motherboard and runs at 6400 MT/s with CL52 latency at 1.1 V. Registered ECC and 4Rx4 organisation let the memory controller address every slot at full rated capacity.

Registered ECC architecture and population rules

Registered buffering reduces electrical load on the memory controller so all eight slots can be populated simultaneously. ECC corrects single-bit errors in flight to prevent silent data corruption. The kit matches the board’s 288-pin RDIMM requirement and its specific population order; consult the motherboard manual for the exact installation sequence before fitting.

Suited for capacity-bound server workloads

This kit suits administrators who need the maximum validated density on a Supermicro X14SRA-F platform. It is not for systems that accept only unbuffered UDIMMs or SODIMMs, nor for boards that do not support 4Rx4 registered modules at this speed. Buyers requiring lower capacities or different form factors should select a matching alternative.

Kohokohdat

  • 512 GB total capacity from eight 64 GB modules for maximum server density
  • DDR5 6400 speed with CL52 latency delivers rated throughput for demanding workloads
  • Registered ECC design with 4Rx4 organisation ensures full-slot stability and error correction
  • 1 V operation at 288-pin RDIMM form factor matches motherboard electrical requirements
  • Verified compatibility with Supermicro X14SRA-F motherboard for guaranteed fitment

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-944K8
Capacity512GB (8 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 8X64GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What is the first limit you hit when running the 512GB 8x64GB DDR5 6400 CL52 kit at full capacity on a Supermicro X14SRA-F?

The memory controller must support 4Rx4 registered DIMMs at DDR5 6400 with 1.1V to recognise all 512GB and run at the rated speed.

How do the 1.1V registered ECC modules behave for heat and fan noise during continuous operation?

Registered architecture offloads the memory controller so every slot runs fully populated, while ECC corrects single-bit errors on the fly.

What motherboard and population rules must already be in place for this 288-pin RDIMM kit to work?

A Supermicro X14SRA-F motherboard with DDR5 6400 support and the correct DIMM population order from the system manual.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.