Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green SODIMM modules with black chips and gold contacts

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR4 3200 CL22 260-Pin SODIMM POSIFLEX XT-8317 memory upgrade

SKU CH-QC1E-HY3JS

A 64 GB DDR4 SODIMM kit with two 32 GB modules running at 3200 MHz CL22 for the POSIFLEX XT-8317 terminal

  • Capacity64GB (2 x 32GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64 GB kit expands POS terminal memory capacity
  • DDR4 3200 speed matches system bus for stable throughput
  • CL22 CAS latency keeps timing consistent under load
  • 2 V operation reduces power draw in fanless chassis
  • 260-pin SODIMM form factor fits POSIFLEX XT-8317 slot exactly

System-specific DDR4 kit for POS terminal

This NEMIX RAM kit delivers 64 GB of DDR4 3200 memory in two 32 GB SODIMM modules built for the POSIFLEX XT-8317 fanless POS terminal. It targets IT teams maintaining or upgrading that specific platform in retail, hospitality or kiosk environments where validated compatibility matters.

DDR4 3200 SODIMM limits in fanless systems

The modules run at 1.2 V with CL22 latency and a 2Rx8 organisation, matching the PC4-25600 data rate the terminal’s memory controller expects. Non-ECC unbuffered operation means error correction is not available, so workloads requiring that protection must use a different platform. The 260-pin form factor fits only DDR4 SODIMM slots.

OEM-grade chips, no heat spreader

Samsung, Micron or Hynix components are used, stress-tested under load for stability in continuous-operation scenarios. Absence of a heat spreader keeps module height low for the tight chassis of the XT-8317, while the standard 260-pin edge connector ensures straightforward insertion into the terminal’s SO-DIMM sockets.

Kohokohdat

  • 64 GB kit expands POS terminal memory capacity
  • DDR4 3200 speed matches system bus for stable throughput
  • CL22 CAS latency keeps timing consistent under load
  • 2 V operation reduces power draw in fanless chassis
  • 260-pin SODIMM form factor fits POSIFLEX XT-8317 slot exactly

Tekniset tiedot

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-328K2
Capacity64GB (2 x 32GB)
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM KIT

Kysymyksiä tästä tuotteesta

Should I pick the 64 GB kit with two 32 GB modules or a different capacity for the POSIFLEX XT-8317?

The kit supplies 64 GB total as two 32 GB SODIMMs, matching the terminal's dual-channel layout for full bandwidth.

What does the DDR4 3200 CL22 rating deliver in daily POS workloads?

At 3200 MT/s with CL22 latency the modules run at the platform's maximum JEDEC speed, keeping transaction processing responsive.

Is the 260-pin SODIMM interface limited by the PC4-25600 standard in this terminal?

The 260-pin DDR4 SODIMM form factor and PC4-25600 rating align with the XT-8317's memory controller, so the bus runs at the rated 3200 MT/s.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.