NEMIX RAM 32GB DDR5 5600 CL46 1.10V 1Rx4 ECC RDIMM server RAM
- 32GB
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
64 GB DDR5 5600 ECC RDIMM kit with CL46 latency and 1.1 V registered operation
Capacity 64GB (2 x 32GB)
This kit contains two 32GB DDR5 registered DIMMs running at 5600 MT/s with CL46 latency and 1.1V operation. It targets servers and workstations that require error-correcting memory for data integrity. The modules use major OEM DRAM chips and are stress tested under load. No heat spreaders are fitted.
The RDIMM form factor and registered buffer suit motherboards designed for registered memory. Systems that accept only unbuffered UDIMMs cannot use these modules. Builders needing higher capacities per slot or lower latency bins should evaluate other configurations. The 1Rx4 organisation may limit maximum population on some boards.
The 288-pin DDR5 RDIMM interface is the single specification that determines fit. Only motherboards with DDR5 RDIMM slots supporting registered ECC operation will accept this kit. Verify the platform qualified vendor list before purchase.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-314K2 |
| Capacity | 64GB (2 x 32GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx4 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Features | DDR5 ECC Registered Server Memory Motherboard Compatible |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
A server motherboard with DDR5 RDIMM slots is needed; the 288-pin form factor and registered design mean it will not fit consumer DDR5 UDIMM boards.
The kit runs at 5600 MT/s with CL46 timings; mixing with slower modules will force all channels to the lowest common speed and may cause instability.
Check the BIOS memory information or OS tools such as dmidecode to verify 5600 MT/s speed, CL46 latency, 1.10 V voltage and ECC enabled status.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?