Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR5 RDIMM sticks without heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 6400 ECC RDIMM CL52 1.1V 2Rx4 Supermicro X14SRG-TF

SKU CH-QEYZ-58QP1

64 GB kit of two 32 GB DDR5 6400 ECC registered DIMMs at CL52 and 1.1 V, validated for the Supermicro X14SRG-TF motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 64GB 2X32GB

Näytä 4 muuta kokoonpanoa
  • 64 GB kit delivers full capacity at rated speed because the 2Rx4 registered ECC modules match the memory controller exactly
  • DDR5 6400 CL52 at 1.1 V provides enterprise stability with on-the-fly error correction for uninterrupted operation
  • 288-pin RDIMM form factor fits the Supermicro X14SRG-TF motherboard precisely without UDIMM or SODIMM mismatch
  • Registered architecture offloads the controller so every slot runs fully populated at full capacity
  • Lifetime replacement warranty and US-based technical support back the upgrade for long-term reliability

Server-grade DDR5 ECC RDIMM kit

This 64GB kit delivers two 32GB registered DDR5 modules rated at 6400 MT/s with CL52 latency and 1.1V operation. The 2Rx4 organisation and ECC support match the Supermicro X14SRG-TF memory controller requirements for full-capacity recognition at rated speed.

Replaces slower or smaller DDR5 RDIMMs

Upgrading from lower-frequency DDR5 or smaller-capacity registered modules is worthwhile when workloads demand the full 64GB at 6400 MT/s with error correction. The exact rank, voltage and timing spec avoids down-clocking or population-rule conflicts on the target board.

Handles memory-intensive server workloads

The registered architecture offloads the controller so every slot runs fully populated at 6400 MT/s, while ECC corrects single-bit errors before they reach production. Capacity is fixed at 64GB; systems needing more memory must use a motherboard that supports larger DIMM counts or higher-density modules.

Kohokohdat

  • 64 GB kit delivers full capacity at rated speed because the 2Rx4 registered ECC modules match the memory controller exactly
  • DDR5 6400 CL52 at 1.1 V provides enterprise stability with on-the-fly error correction for uninterrupted operation
  • 288-pin RDIMM form factor fits the Supermicro X14SRG-TF motherboard precisely without UDIMM or SODIMM mismatch
  • Registered architecture offloads the controller so every slot runs fully populated at full capacity
  • Lifetime replacement warranty and US-based technical support back the upgrade for long-term reliability

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-324K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 288-pin RDIMM modules fit the Supermicro X14SRG-TF motherboard slots?

Yes, the kit uses the 288-pin Registered DDR5 RDIMM form factor that the X14SRG-TF requires, not UDIMM or SODIMM.

What is the correct order to populate the two 32 GB sticks on this board?

Consult the motherboard manual for the approved DIMM population sequence; the kit must be installed in the slots specified for a 2Rx4 Registered ECC configuration.

Does the lack of a heat spreader affect long-term reliability under full load?

The modules are built with major OEM Samsung, Micron or Hynix chips rated for 1.10 V operation at DDR5-6400 CL52, and the Registered ECC design maintains stability without a spreader.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.