Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR4 2933 CL21 desktop RAM

SKU CH-PB9P-2Z139

A 64 GB desktop memory kit of four 16 GB DDR4 modules running at 2933 MT/s with CL21 latency and 1.2 V operation

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR4 UDIMM
  • SpeedDDR4 2933 (PC4 23400)
  • CAS LatencyCL21
  • Voltage1.20V
  • ECCNo

Capacity 64GB (4 x 16GB)

  • 64GB total capacity for demanding multitasking with four 16GB modules
  • DDR4 2933 speed rated at PC4-23400 for responsive data throughput
  • CL21 CAS latency tuned for stable system operation
  • 20V low-voltage design reduces power draw and heat
  • 288-pin UDIMM form factor fits standard desktop motherboards

64GB quad-channel kit for desktop upgrades

This kit supplies 64GB across four 16GB DDR4 modules rated at 2933MT/s with CL21 latency. It targets workstation and enthusiast desktop systems that accept non-ECC unbuffered UDIMMs. The 1.20V operating voltage matches standard DDR4 specifications for broad platform compatibility.

Tool-free DIMM seating with standard keying

Each 288-pin module drops into a UDIMM slot and locks with the board's retention clips. No heat spreader is fitted so clearance around large CPU coolers is maximised. The only common issue is populating slots in the wrong order; consult the motherboard manual for the correct population sequence to enable multi-channel operation.

Stable throughput during extended workloads

Modules are stress-tested under sustained load to verify reliability for continuous compute tasks. The absence of a heat spreader means thermal performance relies on case airflow, so ensure adequate ventilation when running memory-intensive applications for long periods.

Kohokohdat

  • 64GB total capacity for demanding multitasking with four 16GB modules
  • DDR4 2933 speed rated at PC4-23400 for responsive data throughput
  • CL21 CAS latency tuned for stable system operation
  • 20V low-voltage design reduces power draw and heat
  • 288-pin UDIMM form factor fits standard desktop motherboards

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM DDR4 Orignial Desktop PC 288-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR4 Desktop PC Memory Solutions
Part NumberMD23400-628K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR4 UDIMM
SpeedDDR4 2933 (PC4 23400)
CAS LatencyCL21
Voltage1.20V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I verify the 2933 MHz kit is running at its rated speed after installation?

Open Task Manager or a hardware monitor and confirm the memory frequency shows 2933 MHz with CL21 timings at 1.20 V.

What does the 4 x 16 GB kit contain and is anything else required?

The box holds four 288-pin DDR4 UDIMM modules totalling 64 GB; no heat spreaders, cables or extra parts are included or needed.

When should I choose this 64 GB CL21 kit over other capacities?

Select this 4 x 16 GB configuration when your board has four slots and you need the full 64 GB at 2933 MHz without mixing densities.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.