Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR4 UDIMM sticks, no heat spreaders, 288-pin gold contacts

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR4 2933 PC4-23400 CL21 1.2V 288-pin UDIMM memory upgrade

SKU CH-7PQN-6ASGA

A 64 GB kit of four 16 GB DDR4 UDIMM modules running at 2933 MHz CL21 for compatible Supermicro workstations

  • Capacity64GB (4 x 16GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64 GB kit gives ample capacity for heavy workloads
  • DDR4 2933 speed moves data quickly through the system
  • CL21 latency keeps response times tight
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM form factor fits standard desktop slots

System-specific DDR4 kit for Supermicro workstations

This 64 GB kit contains four 16 GB unbuffered UDIMMs rated at DDR4 2933 MT/s with CL21 latency and 1.20 V operation. It is built for Supermicro SuperWorkstation platforms such as the 5039AD-I and motherboards including the MBD-C9X299-PGF and CSE-GS5A-754K.

Verify motherboard slot count

Your board must accept four 288-pin DDR4 UDIMMs and support a total of 64 GB of non-ECC memory. Confirm the firmware revision allows 1Rx8 modules at 2933 MT/s without manual timing changes. The kit has no heat spreader, so ensure case airflow reaches the DIMM area.

Modules are stress-tested under sustained load

Each stick undergoes extended burn-in at rated speed and voltage to validate signal integrity during continuous workloads. The 1Rx8 organisation and major OEM DRAM from Samsung, Micron or Hynix maintain consistent throughput in multi-threaded server tasks without throttling.

Kohokohdat

  • 64 GB kit gives ample capacity for heavy workloads
  • DDR4 2933 speed moves data quickly through the system
  • CL21 latency keeps response times tight
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM form factor fits standard desktop slots

Tekniset tiedot

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-618K4
Capacity64GB (4 x 16GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (4X16GB) DDR4 2933MHZ PC4-23400 1Rx8 1.2V CL21 288-PIN NON-ECC Unbuffered UDIMM KIT

Kysymyksiä tästä tuotteesta

Does the 64 GB kit include four 16 GB modules or do I need to buy extra sticks?

The kit contains four 16 GB UDIMMs for a total of 64 GB; no additional modules are required.

Should I choose the CL21 2933 MHz version or a different speed grade for my Supermicro board?

This kit is validated for Supermicro systems at DDR4 2933 with CL21 timing; select this exact specification for guaranteed compatibility.

What does the PC4-23400 rating mean for actual throughput in my workstation?

PC4-23400 is the module's rated bandwidth class at 2933 MHz, giving you the standard DDR4 throughput for that speed.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.