NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
A 64 GB registered ECC DDR4 kit of four 16 GB modules running at 3200 MHz with CL22 latency for ASUS WRX80 Creator motherboards
This 64 GB kit contains four 16 GB DDR4 3200 registered DIMMs with ECC and CL22 latency. The modules run at 1.2 V and use a 288-pin RDIMM form factor. They are validated for the ASUS WRX80 Creator and WRX80 Creator R2.0 motherboards.
Builders who need registered ECC memory for data integrity on supported ASUS WRX80 platforms will find this kit suitable. Systems that require unbuffered non-ECC DIMMs or a different pin count cannot use these modules.
The registered 288-pin DDR4 interface is the single specification that determines compatibility. Only motherboards designed for DDR4 RDIMM memory with ECC support can accept this kit.
| Brand | NEMIX RAM |
|---|---|
| Series | ASUS Server Motherboard Compatible Series Memory |
| Model | ASUS DDR4 3200MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR25600-628K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASUS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 RDIMM |
| Rank | 2Rx8 |
| Features | DDR4 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT |
The modules operate at the standard 1.20 V DDR4 voltage and have no heat spreader, so they rely on case airflow for cooling.
A server or workstation board with 288-pin DDR4 RDIMM slots that support registered ECC memory is needed.
Yes, the memory controller will run all populated slots at the lowest common speed and latency.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?