Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR5 RDIMM modules, bare circuit boards with gold contacts

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 4800 CL40 ECC RDIMM for HP Z8 G5 Fury G5 memory upgrade

SKU CH-KADZ-90ZJY

Adds 64 GB of DDR5-4800 ECC registered memory in four 16 GB modules for HP Z8 G5 and Fury G5 workstations

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB total capacity expands workstation memory headroom
  • DDR5 4800 speed delivers high bandwidth for demanding workloads
  • ECC registered design protects data integrity in critical applications
  • 1 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits HP Z8 G5 and Fury G5 slots

64 GB DDR5 ECC RDIMM kit

This 64 GB kit contains four 16 GB DDR5 4800 registered DIMMs built for HP Z8 G5 and Z8 Fury G5 workstations. Each module runs at 1.1 V with a CAS latency of CL40. The kit targets professionals who need error-correcting memory for stable operation in supported HP platforms.

Registered ECC with 1Rx8 organisation

The modules use a 1Rx8 layout and registered buffering to maintain signal integrity across all four slots. ECC capability detects and corrects single-bit errors during heavy workloads. Compatibility is limited to the HP Z8 G5 and Z8 Fury G5 systems listed by the supplier.

Low-voltage DDR5 operation

Running at 1.1 V, the DDR5 modules draw less power than previous-generation server memory while delivering 4800 MT/s throughput. The absence of heat spreaders relies on chassis airflow for cooling. Acoustic impact is negligible because the DIMMs have no moving parts.

Kohokohdat

  • 64 GB total capacity expands workstation memory headroom
  • DDR5 4800 speed delivers high bandwidth for demanding workloads
  • ECC registered design protects data integrity in critical applications
  • 1 V operation reduces power draw per module
  • 288-pin RDIMM form factor fits HP Z8 G5 and Fury G5 slots

Tekniset tiedot

BrandNEMIX RAM
SeriesHPE Server/Workstation Compatible Series Memory
ModelHPE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemHPE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Kysymyksiä tästä tuotteesta

What does the 4800 MT/s speed mean once the kit is installed in a Z8 G5 or Fury G5 workstation?

The modules run at the standard DDR5 4800 data rate, delivering PC5-38400 bandwidth with CL40 latency for registered ECC workloads.

How does the DDR5 RDIMM interface and registered design affect usable capacity and speed?

The 288-pin registered DIMM presents a 1Rx8 load per module, allowing the memory controller to address all 64 GB at the rated 4800 MT/s with ECC active.

What physical clearance and slot layout does the four-module kit require in the workstation?

Each 288-pin RDIMM fits a standard DDR5 RDIMM slot; the kit occupies four slots and has no heat spreader, so it clears typical CPU coolers.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.