NEMIX RAM
NEMIX RAM 64GB 4x16GB DDR5 4800 CL40 ECC RDIMM THINKMATE GPX-WS-740RTP7 memory upgrade
64 GB kit of four 16 GB DDR5 4800 CL40 ECC registered DIMMs for Thinkmate GPX-WS-740RTP7 workstations
- Capacity64GB (4 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB capacity from four 16 GB modules for large workloads
- DDR5 4800 speed delivers high bandwidth for demanding applications
- ECC registered design corrects errors to protect data integrity
- 10 V operation reduces power draw in server environments
- Validated for Thinkmate GPX-WS-740RTP7 workstation compatibility
System-Specific DDR5 ECC RDIMM Kit
This NEMIX RAM kit delivers 64 GB of DDR5 memory in a matched set of four 16 GB registered DIMMs. Each module runs at 4800 MT/s with CL40 latency at 1.10 V and includes on-die ECC for error correction. The 288-pin RDIMM form factor is validated for the ThinkMate GPX-WS-740RTP7 workstation platform.
Workstation Builders Needing Registered ECC
IT teams upgrading or servicing the specified ThinkMate workstation gain a tested, single-rank 1Rx8 configuration that meets the platform’s registered memory requirement. Systems that require unbuffered UDIMMs, non-ECC modules, or a different pin count cannot use this kit.
Four-Module Kit Simplifies Population
The package supplies all four DIMMs in one box, so the memory controller sees a balanced quad-channel population without mixing part numbers. No heat spreaders are included, leaving the modules at standard height for dense server chassis. No additional software, cables or accessories are bundled.
Kohokohdat
- 64 GB capacity from four 16 GB modules for large workloads
- DDR5 4800 speed delivers high bandwidth for demanding applications
- ECC registered design corrects errors to protect data integrity
- 10 V operation reduces power draw in server environments
- Validated for Thinkmate GPX-WS-740RTP7 workstation compatibility
Tekniset tiedot
| Brand | NEMIX RAM |
|---|---|
| Series | THINKMATE Server/Workstation Compatible Series Memory |
| Model | THINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | THINKMATE |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Kysymyksiä tästä tuotteesta
Does my workstation need open DDR5 RDIMM slots to install this 4x16GB kit?
Yes, the kit contains four 288-pin DDR5 RDIMM modules and requires four available registered DIMM slots in the THINKMATE GPX-WS-740RTP7.
Can I add these CL40 ECC RDIMMs to existing DDR5 memory in the same system?
Mixing is possible only if the installed modules are also DDR5 ECC RDIMMs at 4800 speed and 1.10V; otherwise the system will default to the slowest common settings or fail to boot.
How do I confirm the full 64GB is detected at 4800 MT/s with ECC active after installation?
Enter the BIOS or UEFI and check the memory information screen — it should show 64GB total, 4800 MT/s operating speed, CL40 timings and ECC enabled.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.



