Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR5 RDIMM sticks in a row

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 4800 ECC RDIMM THINKMATE Compatible memory upgrade

SKU CH-G68Y-RD8FS

A 64 GB DDR5 4800 registered ECC kit of four 16 GB modules at CL40 and 1.1 V for ThinkMate Supermicro SuperServer 111C-NR and 121C-TN2R/TN10R systems

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB capacity across four 16 GB modules for high-density server workloads
  • DDR5 4800 speed with CL40 latency delivers responsive registered memory performance
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • 10 V operating voltage reduces power draw in dense rack environments
  • Validated for Thinkmate Supermicro SuperServer 111C-NR and 121C-TN2R systems

System-Specific DDR5 ECC RDIMM Kit

This NEMIX RAM kit provides 64 GB of DDR5 4800 memory in a matched set of four 16 GB registered DIMMs. It is built for Thinkmate Supermicro SuperServer platforms that require ECC RDIMM modules. The kit targets IT professionals upgrading compatible Thinkmate 111C-NR, 121C-TN2R or 121C-TN10R servers.

Registered ECC with 1Rx8 Organisation

The decisive specification is the registered ECC design combined with a single-rank 1Rx8 layout at CL40 latency. This combination determines whether the server's memory controller will initialise the modules correctly. Systems that expect unbuffered or dual-rank DIMMs will not accept this kit.

Straightforward DIMM Installation

Installation follows the standard 288-pin DDR5 DIMM procedure: power down, open the chassis, align the keyed notch, and press until the latches engage. The most common issue is populating slots in the wrong order for the specific SuperServer model; always consult the system manual for the approved population sequence. No heat spreader is fitted, so airflow across the bare PCB is required.

Kohokohdat

  • 64 GB capacity across four 16 GB modules for high-density server workloads
  • DDR5 4800 speed with CL40 latency delivers responsive registered memory performance
  • ECC registered design detects and corrects single-bit errors to protect data integrity
  • 10 V operating voltage reduces power draw in dense rack environments
  • Validated for Thinkmate Supermicro SuperServer 111C-NR and 121C-TN2R systems

Tekniset tiedot

BrandNEMIX RAM
SeriesTHINKMATE Server/Workstation Compatible Series Memory
ModelTHINKMATE DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemTHINKMATE
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Kysymyksiä tästä tuotteesta

What does the 4800 MT/s rating mean when the kit is installed in a Thinkmate Supermicro server?

The modules will run at up to 4800 MT/s on platforms that support DDR5 4800; the actual speed is set by the server's memory controller and may be lower depending on the CPU and DIMM population.

How does the DDR5 RDIMM interface affect usable bandwidth in these systems?

Registered DDR5 DIMMs add a clock cycle of buffering for signal integrity, allowing higher capacities per channel; the PC5-38400 rating shows the peak transfer rate the interface can deliver.

Will the 288-pin modules fit the memory slots in a Thinkmate 111C-NR or 121C-TN2R?

Yes — the kit uses standard 288-pin DDR5 RDIMM form factor, which matches the DIMM slots on the listed Thinkmate Supermicro SuperServer models.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.