Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Single green 288-pin DDR4 LRDIMM module with black chips and gold contacts

NEMIX RAM

NEMIX RAM 64GB DDR4 2933MHz 4Rx4 ECC LRDIMM server RAM

SKU CH-ETS9-XZKVB

A 64GB DDR4 2933MHz ECC LRDIMM module with 4Rx4 organisation, CL21 latency and 1.2V operation for load-reduced server memory upgrades

  • SpeedDDR4 2933 (PC4 23400)
  • CAS Latency21
  • Voltage1.2V
  • ECCYes
  • Buffered/RegisteredLoad Reduced
  • Rank4Rx4
  • High-density 64 GB module maximises server capacity per slot
  • DDR4 2933 MHz speed supports demanding workloads with PC4-23400 bandwidth
  • ECC and 4Rx4 Load Reduced design protects data integrity in multi-socket systems
  • Low 1.2 V operation reduces power draw in dense deployments
  • Built with major OEM chips from Samsung, Micron or Hynix for consistent reliability

64GB DDR4 2933MHz ECC LRDIMM Module

This 64GB DDR4 2933MHz module is a single 288-pin ECC LRDIMM built for server platforms that require load-reduced memory. It runs at PC4-23400 with a CAS latency of 21 and operates at 1.2V using major OEM chips from Samsung, Micron or Hynix. The 4Rx4 rank configuration helps maximise density per slot in compatible systems.

Server Builders Needing High-Density Registered

This module suits administrators upgrading or repairing servers that specifically call for DDR4 2933MHz ECC LRDIMM. It is not for desktop PCs, workstations that require standard RDIMM or UDIMM, or any system that does not support load-reduced topology. Buyers who need non-ECC memory or faster speeds should look at something else.

4Rx4 Rank Determines Slot Population Limits

The 4Rx4 organisation is the critical specification that dictates how many modules the memory controller can address per channel. If the server documentation limits rank count per channel, this single 64GB stick may reach that limit faster than lower-rank alternatives. Verify the platform's maximum supported ranks before purchasing.

Kohokohdat

  • High-density 64 GB module maximises server capacity per slot
  • DDR4 2933 MHz speed supports demanding workloads with PC4-23400 bandwidth
  • ECC and 4Rx4 Load Reduced design protects data integrity in multi-socket systems
  • Low 1.2 V operation reduces power draw in dense deployments
  • Built with major OEM chips from Samsung, Micron or Hynix for consistent reliability

Tekniset tiedot

BrandNEMIX RAM
ModelPart#: ML23400-944K1-SM-SYS-5019P-M
Part NumberPart#: ML23400-944K1-SM-SYS-5019P-M
SpeedDDR4 2933 (PC4 23400)
CAS Latency21
Voltage1.2V
ECCYes
Buffered/RegisteredLoad Reduced
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix

Kysymyksiä tästä tuotteesta

Does my server motherboard need 288-pin DDR4 slots that support ECC LRDIMM modules?

Yes, this 64GB stick is a 288-pin DDR4 LRDIMM with ECC and a 4Rx4 organisation, so the board must accept load-reduced registered memory.

Can I keep my existing PC4-23400 ECC RDIMMs installed next to this LRDIMM?

No, load-reduced DIMMs and standard registered DIMMs cannot be mixed in the same server; all slots must use the same registered-buffer type.

After installation, how can I confirm the module is recognised at 2933 MHz with ECC active?

Check the BIOS memory information or run a tool such as dmidecode; it should show 64GB, 2933 MT/s, PC4-23400, CAS 21, 1.2 V and ECC enabled.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.