Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green bare circuit board DDR5 RDIMM module with black chips no heat spreader

NEMIX RAM

NEMIX RAM 64GB DDR5 4800 2Rx4 ECC RDIMM server RAM

SKU CH-CMPN-1BJTW

A 64 GB DDR5 4800 registered ECC RDIMM with 2Rx4 organisation, CL40 latency and 1.1 V operation for server motherboards

  • Capacity64GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes
  • 64 GB capacity supports heavy virtualisation workloads
  • DDR5 4800 speed delivers high memory bandwidth
  • ECC registered design protects data integrity
  • 2Rx4 dual-rank organisation increases density per slot
  • 1 V operation reduces server power draw

64 GB DDR5 4800 ECC RDIMM

This 64 GB DDR5 4800 ECC registered DIMM is built for servers and workstations that require error-correcting memory. It operates at 1.10 V with a CAS latency of CL40 and uses a 2Rx4 organisation. The module fits standard 288-pin DDR5 slots and is validated for Micron-compatible platforms.

Suited for registered-memory platforms only

This module suits administrators upgrading or populating DDR5 RDIMM slots in compatible server or workstation boards. It is not for systems that accept only unbuffered UDIMMs, nor for laptops or compact PCs that require SO-DIMM form factors. Buyers needing non-ECC memory or a different rank configuration should look elsewhere.

2Rx4 rank and CL40 latency decide fit

The single specification that determines compatibility is the 2Rx4 registered ECC layout combined with CL40 timing at DDR5 4800. The memory controller must support registered ECC DIMMs with this rank structure and latency; otherwise the module will not initialise or will run at reduced stability.

Kohokohdat

  • 64 GB capacity supports heavy virtualisation workloads
  • DDR5 4800 speed delivers high memory bandwidth
  • ECC registered design protects data integrity
  • 2Rx4 dual-rank organisation increases density per slot
  • 1 V operation reduces server power draw

Tekniset tiedot

BrandNEMIX RAM
SeriesMicron Series Server Memory
ModelMicron Compatible DDR5 ECC Registered RDIMM
Part NumberMR38400-924
Capacity64GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 ECC Registered Server Motherboard Compatible

Kysymyksiä tästä tuotteesta

How can I verify the module is running at 4800 MT/s with CL40 after installation?

Check the memory speed and latency in your server BIOS or a hardware monitoring utility; they should show 4800 MT/s and CL40 at 1.10 V.

What comes in the package and do I need any extra parts?

One 64 GB 288-pin DDR5 RDIMM is included; no cables or brackets are required, just an available RDIMM slot on a compatible server board.

Should I choose the 2Rx4 64 GB version or a different capacity for my server?

The 2Rx4 64 GB module suits platforms that support 2-rank x4 registered DIMMs; match the rank and capacity to your motherboard's qualified-vendor list.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.