Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Single green 288-pin DDR5 RDIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 64GB DDR5 4800 CL40 2Rx4 1.1V ECC RDIMM SuperMicro memory upgrade

SKU CH-GFKW-ZS64J

Adds 64 GB DDR5 4800 ECC registered memory to compatible SuperMicro servers

  • Capacity64GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB capacity supports large workloads
  • DDR5 4800 speed delivers high throughput
  • ECC registered design protects data integrity
  • 10 V operation reduces power draw
  • Validated for SuperMicro SYS-211E-FRN2T and X13SEM-F servers

64GB DDR5 4800 ECC RDIMM for SuperMicro

This 64GB DDR5 4800 module is built for SuperMicro servers and workstations that require registered ECC memory. It runs at 1.10V with CL40 latency and a 2Rx4 organisation. The 288-pin RDIMM form factor fits the SYS-211E-FRN2T, SYS-211E-FRDN2T, X13SEM-F and X13SEM-TF platforms.

Sustained load stability

Registered buffering and on-die ECC keep data integrity intact during continuous workloads. The module is stress-tested under load before shipping, so it maintains the rated 4800 MT/s transfer rate without throttling. Samsung, Micron or Hynix DRAM chips provide consistent signal quality across all ranks.

Upgrade from smaller or slower DIMMs

Replacing lower-capacity DDR5 RDIMMs with this single 64GB stick adds density without consuming extra slots. The jump is worth it when the platform supports 2Rx4 registered modules and the workload benefits from ECC protection at 4800 MT/s.

Kohokohdat

  • 64 GB capacity supports large workloads
  • DDR5 4800 speed delivers high throughput
  • ECC registered design protects data integrity
  • 10 V operation reduces power draw
  • Validated for SuperMicro SYS-211E-FRN2T and X13SEM-F servers

Tekniset tiedot

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K1
Capacity64GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (1X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory

Kysymyksiä tästä tuotteesta

How much power does the 1.1 V DDR5 module draw when the server runs continuously?

The module operates at 1.1 V, the standard voltage for DDR5 registered DIMMs, so power draw stays within the platform’s DDR5 power budget.

What motherboard slot and chipset support are required to install this 288-pin RDIMM?

A SuperMicro motherboard with DDR5 RDIMM slots and a chipset that supports 4800 MT/s registered ECC memory is required.

Can this 2Rx4 registered DIMM be mixed with other DDR5 RDIMMs in the same SuperMicro platform?

Yes, it can be mixed with other DDR5 RDIMMs provided the platform supports mixed-rank populations at 4800 MT/s with ECC registered operation.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.