Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Sixteen green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM 768GB (16x48GB) DDR5 4800 CL40 2Rx8 ECC RDIMM Supermicro H13SSH

SKU CH-Q0ZK-TR1D1

768 GB DDR5 server memory kit with 16 registered ECC modules at 4800 MHz, CL40, 1.1 V, 2Rx8, validated for Supermicro H13SSH

  • Capacity768GB (16 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 768GB 16X48GB

Näytä 30 muuta kokoonpanoa
  • 768 GB total capacity from 16 matched 48 GB modules
  • DDR5 4800 speed with CL40 latency at 1.1 V for rated performance
  • Registered ECC RDIMM architecture corrects single-bit errors and buffers every slot
  • 288-pin 2Rx8 form factor verified for Supermicro H13SSH motherboard
  • Lifetime replacement warranty with US-based technical support included

768GB DDR5 ECC RDIMM kit for Supermicro H13SSH

This 16-module kit delivers 768GB of DDR5-4800 registered ECC memory built to the exact rank, voltage and timing the Supermicro H13SSH motherboard expects. It is intended for administrators who need to fill every DIMM slot with validated capacity for virtualization, database or compute workloads.

DDR5 RDIMM population and speed limits

DDR5 registered DIMMs let the memory controller drive all 16 slots at the rated 4800 MT/s, but the board’s population rules dictate which slots must be filled first and whether mixed-rank configurations are allowed. The 1.1V operating voltage is fixed by the DDR5 standard for this speed grade, so no manual adjustment is possible.

2Rx8 registered ECC architecture

The dual-rank 2Rx8 organization with on-die ECC and registered buffering is the single specification that determines compatibility; the H13SSH memory controller requires this exact combination to recognize full capacity and maintain error correction across all channels.

Kohokohdat

  • 768 GB total capacity from 16 matched 48 GB modules
  • DDR5 4800 speed with CL40 latency at 1.1 V for rated performance
  • Registered ECC RDIMM architecture corrects single-bit errors and buffers every slot
  • 288-pin 2Rx8 form factor verified for Supermicro H13SSH motherboard
  • Lifetime replacement warranty with US-based technical support included

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K16
Capacity768GB (16 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 16X48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I buy the 768GB kit with 16x48GB modules or a different capacity for my Supermicro H13SSH?

Choose the 768GB (16x48GB) kit only if your Supermicro H13SSH motherboard manual confirms support for 16 DIMMs at 48GB each; otherwise select a kit matching the approved population rules and maximum capacity listed for your specific CPU configuration.

What does the DDR5 4800 CL40 rating mean once the modules are installed in the server?

The memory controller will run the kit at 4800 MT/s with a CAS latency of 40 cycles at 1.1V, delivering the rated throughput and timing the board expects when all 16 slots are populated with 2Rx8 registered DIMMs.

How does the 288-pin RDIMM interface and registered ECC design affect real-world operation?

The 288-pin RDIMM form factor fits the H13SSH DIMM slots, while the registered buffer reduces electrical load on the memory controller so all 16 modules operate at full speed, and ECC corrects single-bit errors to prevent data corruption.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.