Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six green DDR5 RDIMM sticks with black chips, no heat spreaders, 288 pins each

NEMIX RAM

NEMIX RAM 768GB (6×128GB) DDR5 5600 CL46 ECC Registered RDIMM Supermicro H14SSF memory upgrade

SKU CH-KK8G-EFK37

Six 128 GB DDR5 RDIMMs deliver 768 GB of registered ECC memory at 5600 MT/s, CL46 and 1.1 V for the Supermicro H14SSF motherboard

  • Capacity768GB (6 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 768GB 6X128GB

Näytä 24 muuta kokoonpanoa
  • 768 GB total capacity for memory-intensive workloads using six 128 GB modules
  • DDR5 5600 speed with CL46 latency matches the board's rated timing exactly
  • Registered ECC design corrects single-bit errors and offloads the memory controller
  • 1 V operation at 2Rx4 rank fits the Supermicro H14SSF population rules
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the server

Exact-fit DDR5-5600 RDIMM kit for Supermicro H14SSF

This 768GB kit contains six 128GB registered ECC modules built to the DDR5-5600 (PC5-44800) standard. It targets administrators and integrators who need the full 768GB capacity on a Supermicro H14SSF motherboard without mixing ranks or voltages.

Registered DDR5 at 1.1V runs every slot at rated

The 2Rx4 registered architecture buffers address and command signals so the memory controller can drive all six slots at 5600 MT/s with CL46 timing. ECC corrects single-bit errors on the fly, preventing silent data corruption in production workloads. The 1.1V operating voltage matches the board's DDR5 specification exactly.

Replaces partial or mixed-capacity populations

Moving from a partially populated or mixed-rank configuration to this uniform 6×128GB kit eliminates population-rule conflicts and lets the server address the full 768GB at the rated data rate. The jump is worth it when the workload demands maximum registered ECC capacity on this specific platform.

Kohokohdat

  • 768 GB total capacity for memory-intensive workloads using six 128 GB modules
  • DDR5 5600 speed with CL46 latency matches the board's rated timing exactly
  • Registered ECC design corrects single-bit errors and offloads the memory controller
  • 1 V operation at 2Rx4 rank fits the Supermicro H14SSF population rules
  • 288-pin RDIMM form factor ensures physical and electrical compatibility with the server

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-724K6
Capacity768GB (6 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 6X128GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I choose the right capacity kit for my Supermicro H14SSF?

This kit provides 768GB using six 128GB modules, matching the board's DDR5 RDIMM slot count and population rules for full-capacity operation.

What does DDR5 5600 CL46 mean for real-world server performance?

The modules run at DDR5 5600 with CL46 latency and 1.1V, giving the memory controller the exact timing and voltage it expects for stable, full-speed operation.

Will the 288-pin RDIMM interface work with my H14SSF motherboard?

Yes, the 288-pin Registered ECC RDIMM form factor is the one the H14SSF requires; it is not compatible with UDIMM or SODIMM slots.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.