BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
8GB DDR3 1333 SODIMM module for laptops, AIOs and small-form-factor systems
This 8 GB DDR3 1333 module fits 204-pin SODIMM slots in laptops, all-in-one PCs, small-form-factor desktops and NAS devices. It runs at PC3-10600 speed with CL9 latency and operates at 1.50 V. The non-ECC, unbuffered design suits mainstream consumer and light commercial systems.
The module is specified for 1.35 V low-voltage use while also supporting standard 1.50 V operation. Running at the lower voltage reduces power draw and heat output in normal workloads. With no heat spreader and no active cooling, the stick relies on chassis airflow and remains silent during use.
The package contains only the memory module itself; no drivers, utilities or mounting hardware are included. Installation is a direct plug-in to a compatible SODIMM slot and the system BIOS configures timing automatically. No further setup steps are required after the physical upgrade.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR3 Orignial Series 204-Pin NON-ECC Unbuffered SODIMM Memory |
| Model | DDR3 NON- ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory |
| Part Number | MS10600-828K1 |
| Capacity | 8GB |
| Type | 204-Pin DDR3 SO-DIMM |
| Speed | DDR3 1333 (PC3 10600) |
| CAS Latency | CL9 |
| Voltage | 1.50V |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | DDR3 Laptop, AIO All-in-One, SFF, NAS Device Compatible |
Power off the laptop, open the memory compartment, align the notch on the module with the slot key, insert firmly until it clicks into the retaining clips, then reassemble and power on.
No scheduled maintenance is required; keep the contacts clean and ensure the laptop's cooling vents stay clear so the unbuffered module operates within its thermal limits.
The DDR3 1333 speed and CL9 latency set the bandwidth ceiling, so memory-intensive tasks will hit throughput limits before the 1.50V voltage or unbuffered design becomes a constraint.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?