NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
8GB DDR4 2400 ECC SODIMM module with CL17 latency and 1.2V operation for compatible laptops and NAS devices
This NEMIX RAM module delivers 8GB of DDR4 2400 memory in a 260-pin SODIMM form factor. It operates at 1.20V with CL17 latency and includes ECC error correction for data integrity. The unbuffered design suits laptops, all-in-one PCs, small-form-factor systems and NAS storage devices.
Builders whose systems support ECC unbuffered SODIMMs will gain single-bit error correction. Systems that require registered or load-reduced modules cannot use this stick. Buyers needing higher capacity per slot or faster speeds should look elsewhere.
The module installs directly into compatible laptop, AIO, SFF or NAS memory slots without a heat spreader. It frees the builder from sourcing registered DIMMs and leaves headroom for additional sticks if the platform has multiple slots.
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM DDR4 Orignial Series 260-Pin ECC Unbuffered SODIMM Memory |
| Model | DDR4 ECC Unbuffered SODIMM Laptop, AIO, SFF, NAS Storage Device Memory |
| Part Number | MSE19200-818K1 |
| Capacity | 8GB |
| Type | 260-Pin DDR4 SO-DIMM |
| Speed | DDR4 2400 (PC4 19200) |
| CAS Latency | CL17 |
| Voltage | 1.20V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Heat Spreader | No |
| Features | DDR4 Laptop, AIO All-in-One, SFF, NAS Device Compatible |
The module uses a 260-pin DDR4 SO-DIMM interface, so the system needs a matching DDR4 SODIMM slot.
Mixing ECC and non-ECC DDR4 is not supported on most platforms; the system will typically disable ECC or fail to boot.
Check the memory speed and timings in BIOS/UEFI or with a tool like CPU-Z; they should show 2400 MT/s and CL17.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?