Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green circuit board SODIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 8GB DDR4 2666 CL19 SODIMM POSIFLEX TX-2300 memory upgrade

SKU CH-VQHP-JZ21Y

An 8 GB DDR4 SODIMM running at 2666 MHz with CL19 timing, built for the POSIFLEX TX-2300 Mini-PC

  • Capacity8GB
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • Designed for POSIFLEX TX-2300 Mini-PC compatibility
  • 8 GB DDR4 2666 MHz CL19 module
  • 2 V low-voltage operation reduces power draw
  • 260-pin SODIMM form factor fits compact boards
  • Built with major OEM chips for stability

POSIFLEX TX-2300 DDR4 upgrade

This SODIMM module is built for the POSIFLEX TX-2300 Mini-PC and compatible point-of-sale controllers. It adds eight gigabytes of DDR4 memory to systems that need extra capacity for multi-tasking or larger datasets. The unbuffered, non-ECC design matches the platform's standard memory requirements. IT teams specify this part when a single-slot upgrade is required.

260-pin SODIMM installation notes

The module fits the 260-pin DDR4 SODIMM socket found in the TX-2300 chassis. Installation typically takes a few minutes after removing the access panel. Ensure the notch aligns before pressing firmly until the side clips lock. The most common issue is inserting the stick at an angle, which prevents the clips from engaging fully.

8GB CL19 capacity and limits

At DDR4 2666 with CL19 timing the stick handles typical POS workloads, web-based dashboards and local database caching without paging. The single-rank 2Rx8 organisation leaves the second slot free for a matching module if the board supports dual-channel operation. Once the workload exceeds eight gigabytes the system will swap to storage, increasing latency.

Kohokohdat

  • Designed for POSIFLEX TX-2300 Mini-PC compatibility
  • 8 GB DDR4 2666 MHz CL19 module
  • 2 V low-voltage operation reduces power draw
  • 260-pin SODIMM form factor fits compact boards
  • Built with major OEM chips for stability

Tekniset tiedot

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM
Part NumberMS21300-828K1
Capacity8GB
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM

Kysymyksiä tästä tuotteesta

How can I verify the module is running at 2666 MHz with CL19 after installation?

Open Task Manager or a hardware monitor such as CPU-Z and confirm the memory speed reads 2666 MHz and the CAS latency shows 19.

What comes in the package and do I need any extra parts for the POSIFLEX TX-2300?

The box contains one 8 GB 260-pin DDR4 SODIMM rated at 1.2 V; no additional components are required for the TX-2300.

Should I choose the 2Rx8 8 GB version or look for a different capacity for this Mini-PC?

This 8 GB 2Rx8 SODIMM is the configuration validated for the POSIFLEX TX-2300; select it when you need a single-module upgrade.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.