BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278972BTC
Varastossa
NEMIX RAM
NEMIX RAM 8GB DDR4 3200 CL22 260-pin SODIMM for POSIFLEX TK-3252 memory upgrade
8GB DDR4 3200 CL22 SODIMM upgrades the POSIFLEX TK-3252 kiosk with 1.2V unbuffered memory
- Capacity8GB
- SpeedDDR4 3200 (PC4 25600)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.20V
- 8GB capacity expands POSIFLEX TK-3252 kiosk memory for smoother multitasking
- DDR4 3200 speed (PC4-25600) delivers responsive data throughput for point-of-sale workloads
- CL22 latency at 1.2V balances performance with low power draw
- 2Rx8 260-pin SODIMM form factor matches POSIFLEX Paragon Series slot exactly
- Major OEM Samsung, Micron, Hynix chips validated for system stability and compatibility
System-Specific SODIMM for POSIFLEX TK-3252
This 8GB DDR4 3200 module is built specifically for the POSIFLEX TK-3252 kiosk. It delivers a straightforward memory upgrade for point-of-sale systems needing extra capacity. The non-ECC unbuffered design matches the original system requirements exactly.
260-pin DDR4 SODIMM form factor
The stick uses the standard 260-pin SODIMM edge connector found in compatible POSIFLEX units. No heat spreader is fitted, keeping the profile slim for tight kiosk chassis. Major OEM chips from Samsung, Micron or Hynix are used on a 2Rx8 layout running at 1.2V.
Check your kiosk model and slot count
Verify the unit is a POSIFLEX TK-3252 before ordering, as this module is validated for that specific system. Confirm an empty SODIMM slot is available for the single 8GB stick. The motherboard must accept DDR4 3200 non-ECC unbuffered memory at CL22 latency.
Kohokohdat
- 8GB capacity expands POSIFLEX TK-3252 kiosk memory for smoother multitasking
- DDR4 3200 speed (PC4-25600) delivers responsive data throughput for point-of-sale workloads
- CL22 latency at 1.2V balances performance with low power draw
- 2Rx8 260-pin SODIMM form factor matches POSIFLEX Paragon Series slot exactly
- Major OEM Samsung, Micron, Hynix chips validated for system stability and compatibility
Tekniset tiedot
| Brand | NEMIX RAM |
|---|---|
| Series | POSIFLEX POS Series Point of Sale Kiosk Memory |
| Model | POSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM |
| Part Number | MS25600-828K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | POSIFLEX POS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 260-Pin DDR4 SODIMM |
| Rank | 2Rx8 |
| Features | DDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM |
Kysymyksiä tästä tuotteesta
Does the DDR4 3200 interface cap the module at PC4-25600 bandwidth?
Yes, the DDR4 3200 specification limits throughput to PC4-25600.
What physical slot does the 260-pin SODIMM need to fit the POSIFLEX TK-3252?
It requires a standard 260-pin DDR4 SODIMM socket in the kiosk.
How is the module installed and which step do people often miss?
Insert the SODIMM at an angle into the slot, then press down until the side clips click — many forget to verify both clips are fully latched.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
BFKK
BFKK 2U Micro ATX Rackmount 2×5.25" 4×3.5" Side 80mm Fan
- Rackmount
216,99 $
0.00281568BTC
Varastossa
