Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 288-pin DDR4 RDIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 8GB DDR4 3200 ECC RDIMM CL22 Tyan FT83A-B7129 memory upgrade

SKU CH-M2YQ-R32FA

Adds 8GB DDR4-3200 ECC registered memory to Tyan Thunder HX FT83A-B7129 servers

  • Capacity8GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in critical workloads
  • Registered design reduces electrical load for stable server operation
  • DDR4 3200 speed matches Tyan FT83A-B7129 specifications
  • 2 V operation lowers power draw per module
  • Single-rank 1Rx8 layout ensures broad motherboard compatibility

System-specific DDR4 ECC RDIMM

This NEMIX RAM module is an 8GB DDR4 3200 registered DIMM with ECC and CL22 latency. It is built for the Tyan Thunder HX FT83A-B7129 server or workstation platform. The single-rank 1Rx8 design operates at 1.20V without a heat spreader.

Compatibility checks before ordering

Verify that your Tyan FT83A-B7129 motherboard accepts DDR4 3200 registered ECC RDIMMs in a 288-pin slot. Confirm the system BIOS supports PC4-25600 speed and CL22 timing at 1.20V. Ensure no mixing with unbuffered or non-ECC modules is required by the board.

Build integration notes

The registered buffer reduces electrical load on the memory controller, freeing headroom for additional DIMMs in multi-slot configurations. ECC capability protects data integrity in mission-critical workloads. The module fits standard 288-pin DDR4 RDIMM sockets and draws 1.20V from the platform supply.

Kohokohdat

  • ECC protection prevents data corruption in critical workloads
  • Registered design reduces electrical load for stable server operation
  • DDR4 3200 speed matches Tyan FT83A-B7129 specifications
  • 2 V operation lowers power draw per module
  • Single-rank 1Rx8 layout ensures broad motherboard compatibility

Tekniset tiedot

BrandNEMIX RAM
SeriesTyan Server/Workstation Motherboard Compatible Series Memory
ModelTyan DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-818K1
Capacity8GB
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemTyan
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank1Rx8
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory

Kysymyksiä tästä tuotteesta

What is included with the MR25600-818K1 module and do I need anything else to install it?

The package contains one 8GB DDR4 3200 ECC RDIMM. No additional parts are required for installation in a compatible Tyan FT83A-B7129 system.

Should I choose the 1Rx8 CL22 version or a different rank and latency for this motherboard?

The Tyan FT83A-B7129 is validated with this 1Rx8 CL22 module; other ranks or latencies are not confirmed for this board.

What does the 3200 MT/s rating deliver once the RDIMM is installed in the FT83A-B7129?

The module runs at DDR4 3200 (PC4-25600) with CL22 latency at 1.20 V, providing registered ECC bandwidth for the qualified server platform.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.