Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green printed circuit board with black memory chips and gold edge contacts

NEMIX RAM

NEMIX RAM 8GB DDR5 5600 CL46 1Rx8 1.1V UDIMM Supermicro X14SAZ-F memory upgrade

SKU CH-5XC7-6PWV8

8GB DDR5 5600 CL46 UDIMM built with major OEM chips for verified fitment in the Supermicro X14SAZ-F motherboard

  • Capacity8GB
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 8GB

  • Exact DDR5-5600 CL46 1.10V spec matches Supermicro X14SAZ-F controller for full-speed recognition
  • 288-pin UDIMM form factor fits the board's required DIMM slots without ECC or SODIMM mismatch
  • Major OEM Samsung Micron Hynix chips tested at rated speed timing and voltage for stable operation
  • 8 GB single-rank 1Rx8 module adds capacity following motherboard population rules for correct installation
  • Lifetime replacement warranty with US-based technical support covers the upgrade long-term

Exact-match DDR5 upgrade for Supermicro X14SAZ-F

This 8 GB DDR5-5600 UDIMM is built to the precise rank, voltage and timing the motherboard expects. It installs as a standard 288-pin unbuffered module and runs at the rated PC5-44800 speed without manual tuning. Major OEM chips from Samsung, Micron or Hynix provide tested stability at CL46 and 1.10 V. The kit delivers a straightforward capacity increase for the specified platform.

Suited for owners of the X14SAZ-F board needing

Builders who require ECC error correction, registered modules or SODIMM form factor should look elsewhere. The module is non-ECC and unbuffered, so it will not meet server-grade data-integrity needs. Systems that demand higher-density ranks or multiple kits to populate all slots will need additional memory beyond this single unit.

8 GB capacity handles everyday workloads

At DDR5-5600 the bandwidth supports general desktop applications, web browsing and office suites comfortably. Memory-intensive tasks such as large-scale virtualisation, heavy rendering or scientific computing will exhaust the 8 GB limit quickly. The single-rank 1Rx8 organisation leaves headroom for adding a second module if the board has free slots and the manual approves the population order.

Kohokohdat

  • Exact DDR5-5600 CL46 1.10V spec matches Supermicro X14SAZ-F controller for full-speed recognition
  • 288-pin UDIMM form factor fits the board's required DIMM slots without ECC or SODIMM mismatch
  • Major OEM Samsung Micron Hynix chips tested at rated speed timing and voltage for stable operation
  • 8 GB single-rank 1Rx8 module adds capacity following motherboard population rules for correct installation
  • Lifetime replacement warranty with US-based technical support covers the upgrade long-term

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K1
Capacity8GB
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

What motherboard slot does this 288-pin DDR5 UDIMM require to operate?

It installs in a standard 288-pin DDR5 DIMM slot on the Supermicro X14SAZ-F motherboard; the board must support DDR5 5600 unbuffered non-ECC memory.

Will this 1Rx8 DDR5 5600 CL46 module run at rated speed alongside other DDR5 DIMMs already installed?

The board's memory controller will train all DDR5 slots to the lowest common speed and timing; matching 5600 CL46 1.10V modules gives the best chance of stable operation at full rating.

How can I confirm the 8GB module is recognised at 5600 MT/s with CL46 after installation?

Enter the BIOS or use a tool such as CPU-Z to verify the memory reports 5600 MT/s, CL46, 1.10V and 8GB capacity.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.