Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR5 RDIMM sticks with gold contacts, no heat spreaders

NEMIX RAM

NEMIX RAM 96GB (2x48GB) DDR5 5600 CL46 ECC RDIMM Supermicro H14SSF memory upgrade

SKU CH-HPFG-Z7YWS

96 GB kit of two 48 GB DDR5 5600 CL46 ECC registered RDIMMs at 1.1 V for Supermicro H14SSF servers

  • Capacity96GB (2 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 96GB 2X48GB

Näytä 24 muuta kokoonpanoa
  • 96 GB capacity across two 48 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency keeps data moving at rated frequency
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the Supermicro H14SSF memory controller specification
  • 288-pin RDIMM form factor fits the board's required memory population rules

96GB DDR5-5600 ECC RDIMM kit for Supermicro H14SSF

This 96GB kit contains two 48GB Registered ECC DDR5 modules rated at 5600MHz with CL46 latency and 1.1V operation. It is built for the Supermicro H14SSF motherboard and matches the board's required 288-pin RDIMM form factor, rank configuration and voltage.

DDR5-5600 bandwidth and Registered DIMM population

The modules run at PC5-44800 speed, delivering the throughput the platform expects when fully populated. Registered buffering offloads the memory controller so every slot can run at rated capacity, while ECC corrects single-bit errors on the fly. Maximum capacity and population order are defined by the motherboard manual, not by the modules themselves.

2Rx8 48GB density per module decides fitment

Each stick uses a 2Rx8 organisation at 48GB density, the exact rank and capacity combination the H14SSF memory controller validates at boot. If your board's qualified-vendor list requires a different rank structure or lower density per DIMM, this kit will not be recognised at full capacity.

Kohokohdat

  • 96 GB capacity across two 48 GB modules for dense server workloads
  • DDR5 5600 speed with CL46 latency keeps data moving at rated frequency
  • Registered ECC design corrects single-bit errors and stabilises fully populated slots
  • 1 V operation matches the Supermicro H14SSF memory controller specification
  • 288-pin RDIMM form factor fits the board's required memory population rules

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K2
Capacity96GB (2 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content96GB 2X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Should I choose the 96GB kit or a smaller capacity for my Supermicro H14SSF?

The 96GB kit provides two 48GB modules that fill two slots at the rated DDR5 5600 speed; smaller kits would leave slots empty and reduce total memory bandwidth.

What does the DDR5 5600 rating deliver inside a running H14SSF system?

The modules operate at 5600 MT/s with CL46 latency at 1.1V, giving the memory controller the exact timing and voltage it expects for full-speed registered ECC operation.

How does the 288-pin RDIMM interface limit or enable this memory on the H14SSF?

The 288-pin registered DIMM form factor matches the H14SSF's DDR5 RDIMM slots, allowing the board to recognise both 48GB ranks per module and run the kit at its full 5600 MT/s rating.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.