NEMIX RAM DDR5-5600 2TB (16x128GB) ECC RDIMM CL46 1.1V Supermicro H14SST-G memory upgrade
- 2TB (16 x 128GB)
- 288-Pin DDR5 RDIMM
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
NEMIX RAM
8GB DDR4 3200 CL22 1Rx8 UDIMM module for ASUS motherboards, 1.2V unbuffered non-ECC
This NEMIX RAM module is a single 8 GB DDR4 3200 UDIMM built to CL22 latency at 1.20 V. It targets owners of compatible ASUS desktop boards who want a straightforward memory upgrade without heat spreaders or ECC overhead.
Builders who need ECC error correction, registered buffering, higher capacities per module, or lower CAS latencies should look at other memory lines because this stick is non-ECC, unbuffered, fixed at 8 GB and rated CL22.
The 288-pin DDR4 UDIMM form factor running at 3200 MT/s is the single specification that determines whether this module will physically fit and operate at its rated speed in the target ASUS system.
| Brand | NEMIX RAM |
|---|---|
| Series | ASUS Gaming Motherboard Compatible Series Memory |
| Model | ASUS DDR4 3200MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD25600-818K1 |
| Capacity | 8GB |
| Speed | DDR4 3200 (PC4 25600) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.20V |
| Compatible System | ASUS |
| CAS Latency | CL22 |
| Heat Spreader | No |
| Type | 288-Pin DDR4 UDIMM |
| Rank | 1Rx8 |
| Features | DDR4 Non- ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 8GB (1X8GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM |
Yes, the module uses the 288-pin DDR4 UDIMM form factor that matches standard desktop motherboard slots.
Align the off-centre notch on the gold edge connector with the key in the slot, then press firmly until both side clips snap shut.
The module runs at 1.2 V with standard JEDEC timings, so normal case airflow is sufficient; no extra cooling is required.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?