Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green 262-pin DDR5 SODIMM module with black chips, no heat spreader

NEMIX RAM

NEMIX RAM CSE-E102TF2 16GB DDR5 4800 CL40 1Rx8 1.1V 262-pin SODIMM memory upgrade

SKU CH-Q98F-P76EH MPN CSE-E102TF2

16 GB DDR5 4800 SODIMM module with CL40 timing and 1.1 V operation for SuperMicro SYS-E102 systems

  • Capacity16GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • Designed for Supermicro SYS-E102-13R-E systems
  • 16 GB DDR5 4800 MHz CL40 capacity
  • Low 1.1 V voltage reduces power draw
  • Single-rank 1Rx8 layout for broad compatibility
  • 262-pin SODIMM fits compact server boards

Compatible with SuperMicro SYS-E102-13R-E

This NEMIX RAM module is a 16GB DDR5 SODIMM built for the SuperMicro IoT SuperServer SYS-E102-13R-E and the Super X13SRN-E-WOHS motherboard. It targets administrators upgrading memory in that specific platform. Buyers needing ECC error correction or registered DIMMs for other servers should look elsewhere.

Installation notes for 262-pin SODIMM

The module uses a standard 262-pin DDR5 SODIMM form factor and runs at 1.1V without a heat spreader. Insert it into the correct slot until the latches click; the system will train at 4800MT/s CL40 automatically. Common issues include seating the stick at an angle or mixing ranks in channels that require matched pairs.

Verify your SuperMicro model before ordering

Confirm the server is a SYS-E102-13R-E with the X13SRN-E-WOHS board, as this part is validated only for that combination. Check the current memory population to ensure an empty SODIMM slot exists and that the BIOS is up to date for DDR5 4800 support. Systems requiring registered or ECC memory are not compatible with this unbuffered non-ECC module.

Kohokohdat

  • Designed for Supermicro SYS-E102-13R-E systems
  • 16 GB DDR5 4800 MHz CL40 capacity
  • Low 1.1 V voltage reduces power draw
  • Single-rank 1Rx8 layout for broad compatibility
  • 262-pin SODIMM fits compact server boards

Tekniset tiedot

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ Non-ECC Unbuffered SODIMM
Part NumberMS38400-618K1
Capacity16GB
SpeedDDR5 4800 (PC5 38400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type262-Pin DDR5 SODIMM
Rank1Rx8
FeaturesDDR5 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V 262-PIN Non-ECC Unbuffered SODIMM

Kysymyksiä tästä tuotteesta

How can I confirm the module is running at DDR5 4800 CL40 after installing it in the SuperMicro IoT SuperServer SYS-E102-13R-E?

Check the memory speed and CAS latency in the system BIOS or a hardware monitoring tool; they should report 4800 MT/s and CL40 for this 16GB SODIMM.

What comes in the package and do I need any extra parts to install it in the SYS-E102-13R-E?

The box contains one 16GB 262-pin DDR5 SODIMM; no additional cables, brackets or heat spreaders are required for installation.

Which version of this NEMIX RAM module matches the SuperMicro X13SRN-E-WOHS motherboard used in the SYS-E102-13R-E?

The CSE-E102TF2 part number (MS38400-618K1) is the specific build validated for that motherboard and server model.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.