Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six green DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM CSE-GS7A-000NBP3 384GB (6x64GB) DDR5 4800 CL40 ECC RDIMM memory upgrade

SKU CH-8C6W-CGE4A MPN CSE-GS7A-000NBP3

A 384 GB DDR5 4800 ECC RDIMM kit of six 64 GB modules at 1.1 V CL40 for SuperMicro SuperWorkstation SYS-751A-I

  • Capacity384GB (6 x 64GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • Massive 384 GB capacity from six 64 GB modules
  • DDR5 4800 speed with CL40 latency for server workloads
  • ECC registered design protects data integrity under load
  • Low 1.10 V operation reduces power draw
  • Validated for Supermicro SYS-751A-I and X13DAI-T platforms

System-Specific DDR5 RDIMM Kit

This NEMIX RAM kit delivers 384GB across six 64GB DDR5 4800 CL40 ECC registered DIMMs. It is built for Supermicro SuperWorkstation SYS-751A-I and X13DAI-T platforms that require 2Rx4 288-pin RDIMMs at 1.1V. The modules use major OEM Samsung, Micron or Hynix chips and ship without heat spreaders for dense server configurations.

Suited For And Not Suited For

This kit suits administrators upgrading compatible Supermicro workstations to maximum registered ECC capacity with matched modules. It is not for systems that accept only unbuffered UDIMMs, platforms limited to lower densities per slot, or builds requiring modules with integrated heat spreaders.

Deciding Specification

The 2Rx4 registered ECC organisation at DDR5 4800 CL40 determines whether the memory controller and BIOS recognise each 64GB module. Verify the platform qualification list before purchase.

Kohokohdat

  • Massive 384 GB capacity from six 64 GB modules
  • DDR5 4800 speed with CL40 latency for server workloads
  • ECC registered design protects data integrity under load
  • Low 1.10 V operation reduces power draw
  • Validated for Supermicro SYS-751A-I and X13DAI-T platforms

Tekniset tiedot

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-924K6
Capacity384GB (6 x 64GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank2Rx4
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content384GB (6X64GB) DDR5 4800MHZ PC5-38400 2Rx4 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Kysymyksiä tästä tuotteesta

Will the 4800 MHz DDR5 modules run alongside my existing DDR5 memory at the same speed?

The kit operates at DDR5 4800 with CL40 latency and 1.10 V; matching modules should share those specifications for stable operation.

How can I confirm the 384 GB kit is recognised and running at CL40 after installation?

Check the BIOS memory summary for 6 x 64 GB modules at DDR5 4800 (PC5-38400) with ECC registered mode active.

Does the box contain only the six 288-pin RDIMMs or are any cables or tools included?

The package includes the 6 x 64 GB DDR5 4800 CL40 ECC RDIMM modules only; no cables, heat spreaders or tools are supplied.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.