Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Four green DDR5 RDIMM sticks with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 384GB 4x96GB 6400MHz CL52 2Rx4 ECC RDIMM Supermicro X14SDW-72C-SP9F

SKU CH-RDWZ-95KMK

384 GB kit of four 96 GB DDR5-6400 ECC registered RDIMMs at CL52 and 1.1 V, validated for Supermicro X14SDW-72C-SP9F

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Näytä 4 muuta kokoonpanoa
  • 384GB total capacity across four 96GB modules maximises server memory density
  • DDR5 6400MHz speed with CL52 latency delivers rated performance on supported platforms
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 1V operation matches the motherboard's voltage requirement for stable full-population runs
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-72C-SP9F memory slots exactly

Exact-Match 384 GB DDR5 Kit

This 384 GB kit contains four 96 GB DDR5 RDIMM modules rated at 6400 MT/s (PC5-51200) with CL52 latency and 1.1 V operation. It is built for the Supermicro X14SDW-72C-SP9F motherboard and delivers registered ECC memory that the server's controller recognises at full capacity and rated speed.

Verify Motherboard Population Rules

Before ordering, consult the Supermicro X14SDW-72C-SP9F manual for supported capacities, approved DIMM population order, and installation steps. The board requires 288-pin Registered RDIMMs; UDIMM or SODIMM modules will not fit or function. Ensure your configuration matches the 2Rx4 rank and 1.1 V specification exactly.

Registered ECC Architecture Benefits

The registered (buffered) design offloads the memory controller so every slot runs fully populated at full capacity. On-die ECC catches and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads. No heat spreaders are included in the package.

Kohokohdat

  • 384GB total capacity across four 96GB modules maximises server memory density
  • DDR5 6400MHz speed with CL52 latency delivers rated performance on supported platforms
  • Registered ECC architecture offloads the controller and corrects single-bit errors automatically
  • 1V operation matches the motherboard's voltage requirement for stable full-population runs
  • 288-pin RDIMM form factor fits the Supermicro X14SDW-72C-SP9F memory slots exactly

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does the 384GB kit contain four 96GB modules or do I need to buy extra DIMMs?

The kit includes four 96GB DDR5 RDIMMs for a total of 384GB; no additional modules are required.

Why is this kit listed as CL52 2Rx4 1.1V and what happens if I mix different timings?

CL52, dual-rank x4 organisation and 1.1V are the exact specifications the Supermicro X14SDW-72C-SP9F memory controller expects; mixing other timings or ranks can prevent the system from booting at 6400MHz.

Will the server actually run at 6400MHz with all four slots populated?

Yes — the registered ECC design and 2Rx4 layout let the board run all four slots at the rated 6400MHz (PC5-51200) without down-clocking.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.