Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Green DDR5 RDIMM circuit board with gold contacts and black memory chips

NEMIX RAM

NEMIX RAM DDR5 48GB 4800MHz CL40 2Rx8 ECC RDIMM Supermicro H13SSL-NT memory upgrade

SKU CH-ECPB-28WAH

48GB DDR5 4800MHz CL40 2Rx8 ECC Registered RDIMM for Supermicro H13SSL-NT servers

  • Capacity48GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 48GB

Näytä 24 muuta kokoonpanoa
  • Exact-match 48GB DDR5-4800 CL40 2Rx8 ECC RDIMM installs at rated speed
  • Verified fit for Supermicro H13SSL-NT 288-pin RDIMM slots per board rules
  • Registered buffer offloads controller for stable full-capacity operation across all slots
  • ECC corrects single-bit errors on the fly to prevent silent data corruption
  • Lifetime replacement warranty with free US-based technical support included

Capacity and platform fit

This 48 GB DDR5 module is built as a direct upgrade for the Supermicro H13SSL-NT motherboard. Registered ECC architecture lets the board run fully populated at rated speed without overloading the memory controller. Buyers who need a different form factor such as UDIMM or SODIMM will not be able to use this kit.

Thermals noise and power draw

Operating at 1.10 V the module draws minimal power and generates low heat under typical server loads. No heat spreader is fitted so airflow across the DIMM slots handles cooling silently. The registered buffer reduces electrical loading on the bus which helps keep system power draw stable.

Build quality and day to day use

Major OEM chips from Samsung Micron or Hynix provide enterprise grade reliability and ECC corrects single bit errors on the fly. The 288 pin RDIMM keying prevents accidental insertion into incompatible slots. Always check the motherboard manual for supported capacities and population order before installation.

Kohokohdat

  • Exact-match 48GB DDR5-4800 CL40 2Rx8 ECC RDIMM installs at rated speed
  • Verified fit for Supermicro H13SSL-NT 288-pin RDIMM slots per board rules
  • Registered buffer offloads controller for stable full-capacity operation across all slots
  • ECC corrects single-bit errors on the fly to prevent silent data corruption
  • Lifetime replacement warranty with free US-based technical support included

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-4828K1
Capacity48GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content48GB DDR5 4800MHz PC5-38400 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install this 288-pin DDR5 RDIMM in the Supermicro H13SSL-NT and which slot order should I follow?

Power off the server, open the chassis, align the module's notch with the DDR5 RDIMM slot key, press firmly until both retention clips click, then consult the H13SSL-NT manual for the exact population sequence required for 2Rx8 registered DIMMs.

What maintenance or replacement will this ECC registered module need over its service life?

No routine maintenance is required; the module has no heat spreader and operates at 1.10 V, so keep airflow clean and rely on ECC to correct single-bit errors — replace only if the system logs uncorrectable errors or a DIMM fails POST.

What limit appears first when this 48 GB CL40 kit runs sustained workloads at 4800 MT/s?

The registered buffer and CL40 latency set the throughput ceiling; with 2Rx8 organization the memory controller reaches its maximum sustainable bandwidth before thermal or voltage limits become a factor at the rated 1.1 V.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.