BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00278311BTC
Varastossa
NEMIX RAM
NEMIX RAM DDR5 5600 256GB 16x16GB ECC RDIMM CL46 1.1V Supermicro H14SST-G
256GB DDR5-5600 registered ECC server kit of sixteen 16GB RDIMMs at CL46 and 1.1V, validated for the Supermicro H14SST-G motherboard
- Capacity256GB (16 x 16GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 256 GB total capacity lets you fully populate the Supermicro H14SST-G with 16 modules
- DDR5-5600 speed delivers PC5-44800 bandwidth for memory-intensive server workloads
- Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
- 1 V operation at CL46 matches the board's exact voltage and timing requirements
- 288-pin RDIMM form factor with 1Rx8 rank configuration ensures verified fitment and full-speed recognition
Exact-Match Server Upgrade
This 256GB kit contains 16 DDR5 RDIMM modules rated at 5600MHz PC5-44800 with CL46 latency and 1.1V operation. Each 16GB stick uses a 1Rx8 registered ECC design built with major OEM chips. The kit is specified for the Supermicro H14SST-G motherboard.
Build Integration
The 288-pin registered DIMM format matches the board's required slot type and memory population rules. Registered architecture buffers the command bus so all 16 slots can run fully populated at rated capacity. On-die ECC corrects single-bit errors without halting the system.
Thermals and Power
Modules operate at 1.10V standard DDR5 voltage with no heat spreaders installed. Registered buffering reduces electrical load on the memory controller during sustained workloads. Passive cooling relies on chassis airflow across the bare PCB.
Kohokohdat
- 256 GB total capacity lets you fully populate the Supermicro H14SST-G with 16 modules
- DDR5-5600 speed delivers PC5-44800 bandwidth for memory-intensive server workloads
- Registered ECC architecture offloads the memory controller and corrects single-bit errors on the fly
- 1 V operation at CL46 matches the board's exact voltage and timing requirements
- 288-pin RDIMM form factor with 1Rx8 rank configuration ensures verified fitment and full-speed recognition
Tekniset tiedot
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-618K16 |
| Capacity | 256GB (16 x 16GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 1Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 256GB 16X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC RDIMM KIT |
Kysymyksiä tästä tuotteesta
What is the CAS latency of the DDR5 5600 modules in this 256GB kit?
Each 16GB module runs at CL46 latency, the timing the Supermicro H14SST-G memory controller expects for DDR5-5600 operation.
How much power do the registered ECC DIMMs draw when the server runs continuously?
The kit operates at 1.1V, and the registered architecture reduces electrical load on the memory controller during sustained full-capacity use.
Which motherboard must already be installed for this memory kit to function?
The kit is verified for the Supermicro H14SST-G motherboard and requires its 288-pin RDIMM slots and registered-DIMM population rules.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
