Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR5 RDIMM modules with gold contacts and black chips, no heat spreaders

NEMIX RAM

NEMIX RAM DDR5 5600 64GB 2x32GB ECC RDIMM CL46 1.1V Supermicro H13SSH

SKU CH-9H8G-GGFJK

A 64GB DDR5 ECC RDIMM kit running at 5600MHz with CL46 latency and 1.1V operation, built for the Supermicro H13SSH motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 64 GB total capacity with two 32 GB modules for full population
  • DDR5 5600 speed rated at PC5-44800 for rated throughput
  • CL46 latency at 1.10 V for specified timing and power
  • ECC registered RDIMM corrects single-bit errors and buffers the memory controller
  • 288-pin 2Rx8 form factor verified for Supermicro H13SSH motherboard

Server-grade DDR5 upgrade for Supermicro H13SSH

This 64GB kit uses two 32GB registered ECC RDIMMs built to the exact DDR5 5600 specification the board requires. It targets administrators who need to populate every slot at full capacity without timing mismatches or voltage drift.

Registered ECC RDIMM with 2Rx8 organisation

The modules run at 1.1V with CL46 latency and a 2Rx8 rank structure that matches the motherboard's memory-controller expectations. Unbuffered UDIMMs or SODIMMs will not work in this platform, so the registered form factor is the single decisive specification.

Kit contains only the two memory modules

No heat spreaders, cables, software licences or mounting hardware are included. The package delivers the verified 288-pin DDR5 RDIMMs so you can install them directly according to the board's population rules.

Kohokohdat

  • 64 GB total capacity with two 32 GB modules for full population
  • DDR5 5600 speed rated at PC5-44800 for rated throughput
  • CL46 latency at 1.10 V for specified timing and power
  • ECC registered RDIMM corrects single-bit errors and buffers the memory controller
  • 288-pin 2Rx8 form factor verified for Supermicro H13SSH motherboard

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Kysymyksiä tästä tuotteesta

What does the DDR5 5600 rating mean for actual throughput on my Supermicro H13SSH?

The modules run at 5600 MT/s, delivering PC5-44800 bandwidth when the board's memory controller is fully populated with registered DIMMs.

How does the 288-pin RDIMM interface limit or enable my memory configuration?

The 288-pin registered form factor is required by the H13SSH; it allows all slots to be filled at 64 GB total while the buffer offloads the memory controller.

Will these 32 GB dual-rank sticks physically fit the H13SSH DIMM slots without a heat spreader?

Yes, the 288-pin RDIMM modules are the exact height and keying the board expects, and the lack of a heat spreader poses no clearance issue.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.