NEMIX RAM
NEMIX RAM DDR5 5600 ECC RDIMM 576GB (12x48GB) CL46 1.1V 2Rx8 Supermicro H13SSH
A 576GB kit of twelve 48GB DDR5 5600 ECC registered DIMMs validated for the Supermicro H13SSH motherboard
- Capacity576GB (12 x 48GB)
- Type288-Pin DDR5 RDIMM
- SpeedDDR5 5600 (PC5 44800)
- CAS LatencyCL46
- Voltage1.10V
- ECCYes
- 576GB total capacity across 12 matched 48GB modules for maximum server density
- DDR5 5600 speed (PC5-44800) delivers rated bandwidth on Supermicro H13SSH
- Registered ECC architecture offloads the controller and corrects single-bit errors in flight
- 2Rx8 organisation at 1.1V matches the board's memory-controller expectations exactly
- 288-pin RDIMM form factor fits the H13SSH slots without adapters or population conflicts
576 GB DDR5 ECC RDIMM kit for Supermicro H13SSH
This twelve-module kit delivers 576 GB of registered DDR5 memory built for the Supermicro H13SSH motherboard. Each 48 GB DIMM uses a 2Rx8 organisation, ECC protection and a 1.1 V operating voltage to meet the board's exact electrical and population requirements.
Capacity and headroom at 48 GB per module
Twelve 48 GB modules fill every slot on the H13SSH, providing the maximum supported density for memory-intensive workloads such as virtualisation, in-memory databases and large-scale analytics. The registered design keeps signal integrity stable across all populated channels, while ECC corrects single-bit errors before they affect production data.
DDR5-5600 interface limits
The kit runs at the DDR5-5600 (PC5-44800) speed with CL46 latency that the H13SSH memory controller specifies. Bandwidth and latency are fixed by this standard; workloads needing higher throughput or lower latency would require a platform that supports faster DDR5 data rates.
Kohokohdat
- 576GB total capacity across 12 matched 48GB modules for maximum server density
- DDR5 5600 speed (PC5-44800) delivers rated bandwidth on Supermicro H13SSH
- Registered ECC architecture offloads the controller and corrects single-bit errors in flight
- 2Rx8 organisation at 1.1V matches the board's memory-controller expectations exactly
- 288-pin RDIMM form factor fits the H13SSH slots without adapters or population conflicts
Tekniset tiedot
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Server Memory |
| Model | DDR5 ECC RDIMM Registered Server Memory |
| Part Number | MR44800-4828K12 |
| Capacity | 576GB (12 x 48GB) |
| Type | 288-Pin DDR5 RDIMM |
| Speed | DDR5 5600 (PC5 44800) |
| CAS Latency | CL46 |
| Voltage | 1.10V |
| ECC | Yes |
| Buffered/Registered | Registered |
| Rank | 2Rx8 |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Heat Spreader | No |
| Compatible System | Supermicro |
| Features | DDR5 ECC RDIMM Motherboard Compatible |
| Package Content | 576GB 12X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT |
Kysymyksiä tästä tuotteesta
Will the 12 48GB DDR5 5600 RDIMMs populate all slots on my Supermicro H13SSH without downclocking?
The kit is verified for the H13SSH and matches the board's 288-pin RDIMM requirement, 2Rx8 rank structure, 1.1V voltage and CL46 timing so the memory controller recognises the full 576GB at rated speed.
How can I confirm the 576GB DDR5 5600 ECC kit is running at CL46 1.1V after installation?
Check the BIOS memory information screen — it should show 5600 MT/s, CL46, 1.1V and ECC active across all 12 modules.
Does the 12-module 576GB package include anything besides the DDR5 RDIMMs?
The package contains only the 12 x 48GB DDR5 5600 CL46 1.1V 2Rx8 ECC RDIMMs; no heat spreaders, cables or additional accessories are included.
Myös tällä osastolla
Asiakkaat vertailivat myös näitä
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Mushkin Enhanced
Mushkin Enhanced 4GB DDR2-800 CL6 SoDIMM Apple 971741A memory upgrade
104,99 $
0.00132961BTC
Varastossa
SK hynix
SK hynix HYMD232M646C6-J 256MB DDR 333MHz PC2700 CL2.5 SODIMM laptop RAM
- 4GB (2 x 2GB)
7,99 $
0.00010119BTC
Varastossa