Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Six bare green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM DDR5 5600MHz 384GB (6x64GB) ECC RDIMM CL46 1.1V 2Rx4 288-pin memory upgrade

SKU CH-DVWH-JGHN9

384GB DDR5 ECC registered server memory kit with six 64GB modules at 5600MHz CL46 1.1V for ASRock Rack TURIND12M3-2Q/500W

  • Capacity384GB (6 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 6X64GB

  • Massive 384 GB capacity across six 64 GB modules for memory-intensive workloads
  • DDR5 5600 speed delivers high bandwidth for server applications
  • Registered ECC architecture corrects single-bit errors to prevent data corruption
  • 1 V operation reduces power draw in fully populated systems
  • 288-pin RDIMM form factor matches ASRock Rack TURIND12M3-2Q/500W motherboard requirements

Exact-fit server memory

This 384 GB kit consists of six 64 GB DDR5 registered DIMMs built to the 5600 MT/s PC5-44800 standard. Each module uses a 2Rx4 organisation, runs at 1.1 V and carries CL46 latency. The registered ECC design matches the ASRock Rack TURIND12M3-2Q/500W motherboard requirements so the full capacity is recognised and operates at rated speed.

Sustained-load behaviour

Registered buffering reduces the electrical load on the memory controller, allowing all slots to remain fully populated without signal degradation during continuous operation. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption that could otherwise halt production workloads or trigger unplanned reboots.

DDR5 interface limits

The DDR5 5600 standard delivers a peak transfer rate of 44800 MB/s per module, but actual throughput depends on the motherboard's memory-controller implementation and the population rules documented in its manual. The 288-pin RDIMM form factor is physically incompatible with UDIMM or SODIMM slots, so the kit cannot be used in platforms that require those alternatives.

Kohokohdat

  • Massive 384 GB capacity across six 64 GB modules for memory-intensive workloads
  • DDR5 5600 speed delivers high bandwidth for server applications
  • Registered ECC architecture corrects single-bit errors to prevent data corruption
  • 1 V operation reduces power draw in fully populated systems
  • 288-pin RDIMM form factor matches ASRock Rack TURIND12M3-2Q/500W motherboard requirements

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K6
Capacity384GB (6 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemASRock Rack
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 6X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Will the 1.1V DDR5 5600 RDIMMs add much heat or power draw when the server runs continuously?

Each module operates at the standard DDR5 1.10V, so total power scales with the 384GB capacity rather than exceeding the platform's baseline; the registered design also reduces electrical load on the memory controller during sustained full-population operation.

What motherboard and DIMM-slot configuration must I already have for this 6 x 64GB kit to function?

You need an ASRock Rack TURIND12M3-2Q/500W motherboard with six available 288-pin DDR5 RDIMM slots and a CPU memory controller that supports 2Rx4 registered ECC modules at the full 5600 MT/s data rate.

Can I mix this 2Rx4 CL46 registered kit with other DDR5 RDIMMs of different rank or latency already installed in the same board?

Mixing ranks, latencies or capacities in the same channel will force the controller to down-clock or disable ECC, so the manufacturer recommends populating all twelve slots with identical 2Rx4 CL46 modules for guaranteed stability.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.