Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Two green DDR5 UDIMM sticks, no heat spreaders, 288-pin gold contacts

NEMIX RAM

NEMIX RAM MD44800-328K2 64GB 2x32GB DDR5 5600 CL46 1.1V 2Rx8 UDIMM Supermicro X13SAE-F memory upgrade

SKU CH-GVG4-P4SVM

A 64 GB kit of two 32 GB DDR5 5600 CL46 unbuffered UDIMMs built with major OEM chips and validated for the Supermicro X13SAE-F motherboard

  • Capacity64GB (2 x 32GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 64GB 2X32GB

  • 64 GB total capacity from two 32 GB modules for high-density desktop workloads
  • DDR5-5600 (PC5-44800) speed delivers rated bandwidth for Supermicro X13SAE-F systems
  • CL46 CAS latency and 1.1 V voltage match the board's memory controller expectations
  • 2Rx8 dual-rank unbuffered UDIMM layout fits the motherboard's population rules exactly
  • Built with Samsung, Micron or Hynix OEM chips and tested at rated specifications

Exact-match upgrade for Supermicro X13SAE-F

This 64GB kit delivers two 32GB DDR5 UDIMM modules rated at 5600MHz PC5-44800 with CL46 latency and 1.1V operation. The 2Rx8 unbuffered non-ECC design matches the memory controller requirements of the Supermicro X13SAE-F motherboard for full-capacity recognition at rated speed.

Standard JEDEC thermals and power

Operating at the standard 1.10V DDR5 voltage, the modules run within normal thermal limits for unbuffered UDIMMs without a heat spreader. Power draw follows the DDR5 5600 specification, and acoustic output is silent since the kit uses passive cooling only.

Major OEM chips and lifetime support

Modules are built with Samsung, Micron or Hynix components and tested for stability at the rated speed, timing and voltage. The package contains the two UDIMMs only; no additional software or accessories are included. Lifetime replacement warranty and US-based technical support back the kit.

Kohokohdat

  • 64 GB total capacity from two 32 GB modules for high-density desktop workloads
  • DDR5-5600 (PC5-44800) speed delivers rated bandwidth for Supermicro X13SAE-F systems
  • CL46 CAS latency and 1.1 V voltage match the board's memory controller expectations
  • 2Rx8 dual-rank unbuffered UDIMM layout fits the motherboard's population rules exactly
  • Built with Samsung, Micron or Hynix OEM chips and tested at rated specifications

Tekniset tiedot

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-328K2
Capacity64GB (2 x 32GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB 2X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I install the 288-pin DDR5 UDIMM modules on the Supermicro X13SAE-F, and which step is commonly missed?

Insert both 32 GB sticks into the motherboard's DDR5 slots following the manual's population order, then verify the BIOS detects 64 GB at 5600 MT/s — many builders forget to check the population sequence.

What maintenance or replacement will the 2Rx8 DDR5 5600 kit need over its service life?

No scheduled maintenance is required; the modules have no heat spreaders or moving parts, and the lifetime replacement warranty covers any defect that appears during normal operation.

What limit appears first when the 1.1 V CL46 memory runs under sustained heavy load?

The CAS latency of 46 cycles at 5600 MT/s sets the timing floor; thermal throttling is unlikely without a spreader, so latency remains the primary constraint.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.