Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään

NEMIX RAM

NEMIX RAM MR25600-924K2 128GB (2x64GB) DDR4 3200 ECC RDIMM memory upgrade

SKU CH-R8AF-PS1A2

A 128 GB dual-channel DDR4 3200 ECC registered kit built for Dell PowerEdge XE7100, XE7420 and XE7440 servers

  • Capacity128GB (2 x 64GB)
  • SpeedDDR4 3200 (PC4 25600)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 128GB total capacity from two 64GB modules
  • DDR4 3200 speed rated at PC4-25600 bandwidth
  • ECC registered design protects data integrity
  • 2V operation reduces server power draw
  • Validated for Dell PowerEdge XE7100 XE7420 XE7440

Dell PowerEdge XE7100/XE7420/XE7440 Kit

This NEMIX RAM kit delivers 128GB of DDR4 3200 ECC registered memory in two 64GB modules. It is built for Dell EMC PowerEdge XE7100, XE7420 and XE7440 rack servers that require registered DIMMs with error correction. The modules run at 1.2V with a CAS latency of CL22 and use a 2Rx4 rank configuration.

IT teams running virtualised workloads

The registered ECC design suits administrators who need data integrity and stability for virtualisation, databases or high-performance computing on the listed PowerEdge platforms. Builders assembling custom white-box servers or workstations that accept only unbuffered UDIMMs should look at something else, as registered modules will not function in those systems.

128GB dual-module capacity

Two 64GB RDIMMs provide a dense starting point for memory-hungry applications and leave additional DIMM slots open for future expansion on supported motherboards. The kit reaches its limit when the server's maximum supported memory per channel or total system capacity is reached, which varies by specific CPU configuration and BIOS revision.

Kohokohdat

  • 128GB total capacity from two 64GB modules
  • DDR4 3200 speed rated at PC4-25600 bandwidth
  • ECC registered design protects data integrity
  • 2V operation reduces server power draw
  • Validated for Dell PowerEdge XE7100 XE7420 XE7440

Tekniset tiedot

BrandNEMIX RAM
SeriesDell Server/Workstation Compatible Series Memory
ModelDell DDR4 3200MHZ ECC RDIMM Registered Server Memory
Part NumberMR25600-924K2
Capacity128GB (2 x 64GB)
SpeedDDR4 3200 (PC4 25600)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemDell
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 RDIMM
Rank2Rx4
FeaturesDDR4 ECC Registered RDIMM Server Motherboard Compatible
Package Content128GB (2X64GB) DDR4 3200MHZ PC4-25600 2Rx4 1.2V CL22 288-PIN ECC RDIMM Registered Server Memory KIT

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

Does this kit require a Dell PowerEdge server with DDR4 RDIMM slots to function?

Yes, the 288-pin DDR4 RDIMM modules are built for Dell PowerEdge XE7100, XE7420 and XE7440 rack servers that accept registered ECC memory.

Can I mix these 64 GB 2Rx4 modules with existing 32 GB RDIMMs in the same server?

The kit runs at 3200 MT/s CL22 1.20 V; the server will clock all installed RDIMMs to the lowest common speed and timing.

How do I confirm the full 128 GB is recognised and ECC is active after installation?

Check the system BIOS or iDRAC inventory — it should show 128 GB total across two 64 GB 2Rx4 modules with ECC status enabled.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.