Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Small rectangular green circuit board with black potentiometer, toggle switch and LED, copper finish visible

NEWNEWLIU PC-2004 6-28V 3A 80W PWM DC motor speed controller fan control

SKU CH-H68Z-H6BCX MPN PC-2004

PWM speed controller for 6–28 V DC motors up to 80 W with forward/reverse switch and LED indicator

  • Product name1 Pcs DC Motor Speed Controller NEWNEWLIU
  • motor size50 mm x 32 mm x 0.59 mm
  • type of bulbLED
  • featuresLED
  • weight0.032 kilograms
  • description1 Pcs DC Motor Speed Controller, 3A, LED, Copper, Black, NEW
  • PWM speed control up to 28 V 3 A
  • Built-in switch for forward reverse and stop
  • LED indicator shows power status and motor speed
  • Compact 50 mm by 32 mm board weighs 32 g
  • Suitable for DC fans pumps and similar low-voltage motors

DC motor speed controller

The NEWNEWLIU PC-2004 regulates DC motor speed from 6 V to 28 V with a 3 A current limit. PWM adjustment is handled by an onboard potentiometer and a built-in switch provides forward, reverse and stop control. An LED indicator shows power status and speed level. The module measures 50 mm by 32 mm by 0.59 mm and weighs 0.032 kg.

Hobbyists and small-project builders

Suits makers controlling fans, fish-tank pumps or similar low-power DC motors up to 80 W. Not for anyone needing AC mains input, automotive-voltage systems or motors drawing more than 3 A.

6 V to 28 V input range

The controller only operates within this DC voltage window; connecting it directly to 220 V AC will destroy the unit. Verify your power source stays inside the stated range before wiring.

Kohokohdat

  • PWM speed control up to 28 V 3 A
  • Built-in switch for forward reverse and stop
  • LED indicator shows power status and motor speed
  • Compact 50 mm by 32 mm board weighs 32 g
  • Suitable for DC fans pumps and similar low-voltage motors

Tekniset tiedot

BrandNEWNEWLIU
ModelPC-2004
Product name1 Pcs DC Motor Speed Controller NEWNEWLIU
motor size50 mm x 32 mm x 0.59 mm
type of bulbLED
featuresLED
weight0.032 kilograms
description1 Pcs DC Motor Speed Controller, 3A, LED, Copper, Black, NEWNEWLIU, PC-2004
finishCopper
materialPaper
dimensions2.1082 cm x 6.7056 cm x 11.5062 cm

Kysymyksiä tästä tuotteesta

What physical space does the 50 mm × 32 mm × 0.59 mm board need to fit inside my enclosure?

The controller measures 50 mm long, 32 mm wide and 0.59 mm thick, so allow at least that footprint plus clearance for wiring and the potentiometer shaft.

Which wiring step is most often done wrong when installing the PC-2004?

Reversing the DC supply polarity — connecting positive to negative — will damage the board, so verify the wiring order before powering on.

What part of the PC-2004 will need attention or replacement over time?

The potentiometer and the built-in direction switch are the only moving parts; if speed control becomes noisy or direction changes fail, replace the controller.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.