Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver rectangular metal power supply with built-in fan and terminal connections

NShi

NShi RSP-1500-27 1500W 56A 27V power supply

SKU CH-FE5E-41F7A

Enclosed 27 V AC/DC supply delivers 1500 W at 56 A with active PFC, remote control, sensing and DC-OK signal

  • Chassis TypeDesktop
  • Up to 91% efficiency reduces energy waste
  • Operates reliably from -20°C to +70°C at full load
  • Adjustable voltage and constant current suit diverse applications
  • Built-in protections guard against short circuit, overload, over-voltage and over-temperature
  • Remote switch, remote sensing, auxiliary power and DC OK signal simplify system integration

Industrial 1500W 27V power supply

The NShi RSP-1500-27 delivers a single 27V output at 56A for 1500W total power. It suits industrial automation, test equipment and DIY engineering projects that need adjustable voltage and constant-current control with active PFC.

Enclosed chassis with built-in fan

The slim enclosed metal case uses a built-in DC fan for cooling and operates at full load from -20 to 70 Celsius. Installation requires wiring to screw terminals; take care not to exceed the rated current for long periods or protection may engage.

Verify your 27V 56A load requirement

Confirm that your application needs a 27V single-output supply capable of 56A continuous current. This unit is not for builds requiring multiple output rails, ATX form-factor mounting or lower-voltage DC distribution.

Kohokohdat

  • Up to 91% efficiency reduces energy waste
  • Operates reliably from -20°C to +70°C at full load
  • Adjustable voltage and constant current suit diverse applications
  • Built-in protections guard against short circuit, overload, over-voltage and over-temperature
  • Remote switch, remote sensing, auxiliary power and DC OK signal simplify system integration

Tekniset tiedot

Chassis TypeDesktop

Kysymyksiä tästä tuotteesta

How can I confirm the RSP-1500-27 is operating correctly after installation?

Check that the DC OK signal output is active and measure the output to verify it stays at 27V and up to 56A under load. The built-in fan should run and the unit should remain within the -20 to +70 operating range.

What comes in the box with the RSP-1500-27 and what must I source separately?

The supply itself is included with its enclosed metal chassis and built-in DC fan. You will need to provide AC input wiring, DC output cables, and any connectors for the remote switch, remote sensing, and auxiliary power terminals.

Which version of the RSP-1500 series should I choose for a 27V 1500W requirement?

Select the RSP-1500-27 model; it delivers 27V at 56A for a total of 1500W with up to 91% efficiency. Other voltage models in the series will not match this output specification.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.