Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Silver dual-fan graphics card with angular shroud, two-slot metal backplate, 8-pin and 6-pin power connectors, DisplayPort HDMI DVI

NVIDIA

NVIDIA GeForce RTX 2080 SUPER Founders Edition graphics card

SKU CH-08JS-0DD3D

Delivers real-time ray tracing and 496 GB/s memory bandwidth with 8 GB GDDR6 at 15.5 Gbps, 3072 CUDA cores boosting to 1815 MHz, and DisplayPort 1.4, HDMI 2.0b and DVI-DL outputs for 7680×4320

  • Core Clock1650 MHz
  • Boost Clock1815 MHz
  • CUDA Cores3072
  • Effective Memory Clock15.5 Gbps
  • Memory Size8GB
  • Memory Interface256-Bit
  • Real-time ray tracing powered by dedicated RT cores
  • DLSS upscaling driven by Tensor cores for higher frame rates
  • 8 GB GDDR6 memory on a 256-bit bus delivering 496 GB/s bandwidth
  • Boost clock reaches 1815 MHz across 3072 CUDA cores
  • VR ready with DisplayPort 1.4, HDMI 2.0b and DVI-DL outputs

GeForce RTX 2080 SUPER Founders Edition

The GeForce RTX 2080 SUPER Founders Edition is a graphics card built on the Turing architecture for 1440p and 4K gaming. It ships with 3072 CUDA cores, 8 GB of GDDR6 memory on a 256-bit bus and a 1815 MHz boost clock. The board connects through PCI Express 3.0 and supports DirectX 12, Vulkan and OpenGL 4.5.

Sustained load behaviour

Under continuous load the GPU runs at its 1815 MHz boost clock while the 15.5 Gbps memory delivers 496 GB/s of bandwidth. The Turing engine provides 63 T RTX-OPS and 8 Giga Rays/s for real-time ray tracing workloads. NVENC Turing hardware encoding and NVLink SLI support remain active during extended sessions.

Thermals, noise and power

The dual-fan cooler keeps the GPU at or below its 89 °C maximum temperature in normal use. Total graphics power is rated at 250 W, fed by one 8-pin and one 6-pin connector, while the system requires a 650 W supply. The card occupies two slots and measures 10.5 inches in length.

Kohokohdat

  • Real-time ray tracing powered by dedicated RT cores
  • DLSS upscaling driven by Tensor cores for higher frame rates
  • 8 GB GDDR6 memory on a 256-bit bus delivering 496 GB/s bandwidth
  • Boost clock reaches 1815 MHz across 3072 CUDA cores
  • VR ready with DisplayPort 1.4, HDMI 2.0b and DVI-DL outputs

Tekniset tiedot

ModelNVIDIA CUDA Cores
Core Clock1650 MHz
Boost Clock1815 MHz
CUDA Cores3072
Effective Memory Clock15.5 Gbps
Memory Size8GB
Memory Interface256-Bit
Memory TypeGDDR6
Max Resolution7680x4320
SLI SupportNVDIA NVLINK (SLI-I Recommended PSU: 650W
Virtual Reality ReadyYes
CoolerDouble Fans
Power Connector1 x 8-pin, 1 x 6-pin
HDCP Ready2.2

Kysymyksiä tästä tuotteesta

Will the 10.5 inch length and 2-slot width fit in my mid-tower case?

The card measures 266.74 mm long and occupies two expansion slots; measure your case clearance and slot spacing against those dimensions to confirm fit.

Is a 650 W power supply enough for this 250 W GPU?

NVIDIA recommends a 650 W system power supply; ensure your unit has both an 8-pin and a 6-pin PCIe connector and sufficient 12 V rail capacity.

Can I drive a 7680x4320 display at high refresh over DisplayPort?

The DisplayPort 1.4 outputs support the maximum digital resolution of 7680x4320; refresh rate at that resolution depends on the monitor and cable bandwidth.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.