Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Full-height single-slot graphics card with silver cooler, two DisplayPort and one DVI output, rear bracket attached

NVIDIA

NVIDIA Quadro 4000 2GB GDDR5 workstation graphics card

SKU CH-4C56-XM78E MPN 4000

Delivers 2GB GDDR5 memory on a 256-bit bus with two DisplayPort and one DVI output for dual-display workstations

  • InterfacePCI Express 2.0 x16
  • Chipset ManufacturerNVIDIA
  • GPUQuadro 4000
  • Memory Size2GB
  • Memory Interface256-bit
  • Memory TypeGDDR5
  • 2GB GDDR5 memory drives professional 3D workloads
  • 256-bit interface feeds the GPU with high bandwidth
  • Dual DisplayPort plus DVI connect two calibrated monitors
  • 142W TGP fits standard workstation power budgets
  • PCI Express 2.0 x16 installs in full-height slots

Fermi architecture & 2 GB GDDR5

This is a full-height, single-slot workstation graphics card built on the Fermi architecture with 2 GB of 256-bit GDDR5 memory. It connects through a PCI Express 2.0 x16 slot and draws up to 142 W TGP via a 6-pin auxiliary power connector.

Professional users needing legacy APIs

The card targets professionals maintaining workflows that rely on DirectX 11 and OpenGL 4.4 across a maximum of two displays. Buyers who need modern compute APIs, higher memory capacity or support for more than two monitors should look elsewhere.

PCI Express 2.0 x16 interface requirement

Your motherboard must provide a PCI Express 2.0 x16 slot and a free 6-pin power connector to install this card. Without that interface and power provision the card cannot operate.

Kohokohdat

  • 2GB GDDR5 memory drives professional 3D workloads
  • 256-bit interface feeds the GPU with high bandwidth
  • Dual DisplayPort plus DVI connect two calibrated monitors
  • 142W TGP fits standard workstation power budgets
  • PCI Express 2.0 x16 installs in full-height slots

Tekniset tiedot

BrandNVIDIA
SeriesQuadro
Model641329915035
InterfacePCI Express 2.0 x16
Chipset ManufacturerNVIDIA
GPUQuadro 4000
Memory Size2GB
Memory Interface256-bit
Memory TypeGDDR5
DirectXDirectX 11
OpenGLOpenGL 4.4
DisplayPort2
DVI1
Auxiliary Power Connector6 Pin

Kysymyksiä tästä tuotteesta

How can I verify the Quadro 4000 is working after installation?

Install the NVIDIA driver, open the NVIDIA Control Panel and confirm the GPU shows 2GB GDDR5 memory, DirectX 11 and OpenGL 4.4 support, then run a short viewport test in your CAD application.

What comes in the box and what must I supply?

The card ships with a rear bracket; you must provide a PCI Express 2.0 x16 slot, a 6-pin auxiliary power connector from your PSU, and DisplayPort or DVI cables for up to two monitors.

Which version should I choose for a dual-monitor workstation?

This single model delivers 2GB 256-bit GDDR5, two DisplayPort outputs and one DVI port, supporting two active displays at 2560 x 1600 digital or 2048 x 1536 analog resolution.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.